611824
35
Zoom out
Zoom in
Vorherige Seite
1/256
Nächste Seite
Additional information 11
35
En
English Français Español
Do not let the signal surface of discs get scratched or
dirty.
Do not attach pieces of paper or stickers to discs. Doing
so could warp discs, making it impossible to play them.
Also note that rental discs often have labels attached to
them, and the label’s glue may have oozed out. Check
that there is no glue around the edges of such labels
before using rented discs.
About specially shaped discs
Specially shaped discs (heart-shaped, hexagonal, etc.)
cannot be played on this unit. Do not attempt to play such
discs, as they could damage this unit.
About iPod/iPhone/iPad
“Made for iPod,” “Made for iPhone,” and “Made for iPad”
mean that an electronic accessory has been designed to
connect specifically to iPod, iPhone, or iPad, respectively, and
has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect wireless
performance.
iPad, iPhone, iPod, iPod nano, iPod touch, and Retina are
trademarks of Apple Inc., registered in the U.S. and other
countries.
iPad Air, iPad mini, and Lightning are a trademark of Apple Inc.
Auto power off setting
Long press the # on the unit for 3 seconds to switch auto
power off setting ON/OFF.
The operation can be conducted using only the
#
on the
unit.
No need to set this using the remote control.
Initial setting is set to
ON
.
Note
When the auto power off is set to
ON
, “APD ON” will be
displayed on the main display.
When the auto power off is set to
OFF
, “APD OFF” will be
displayed on the main display.
Restoring all the settings to the defaults
Use the steps below to restore the all settings to their
defaults.
1 Press
1STANDBY/ON
to turn the power on.
2 Press
CD
on the remote control or
INPUT
on
the main unit repeatedly to select
CD
input.
3 Press
$ OPEN/CLOSE
to open the disc tray.
4 Press
1
STANDBY/ON on the unit for
3 seconds while pressing
#
.
“DEFAULT” is displayed while the settings are being
restored. Power is turned off.
No need to set this using the remote control.
;+0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸵᭶㸲᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸲᫬㸳㸶ศ
35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

pioneer-x-hm22

Suche zurücksetzen

  • Gibt es beim Pioneer X-HM22 keine balance-Regelung? Mir scheint sie unauffindbar, habe aber einen einseitigen Sound auf einem Lautsprecher. Hilfe! Eingereicht am 13-2-2021 21:49

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer X-HM22 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info