Bedienungsanleitung Pioneer X-SMC11 (Seite 25 von 37) (Englisch)

528330

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Using the tuner 08

• If no station can be found, “NO FOUND” will appear for

4 seconds.

Information provided by RDS

Each time the

RDS

DISPLAY is pressed, the display will switch

as follows:

When tuning in to a station other than an RDS station or to an

RDS station which sends weak signal, the display will change

in the following order:

Using the Auto Station Program

Memory (ASPM)

While in the ASPM operation mode, the tuner will

automatically search for new RDS stations. Up to 30 stations

can be stored.

If you have already stored some stations in memory, the

number of new stations you can store will be less.

1 Press

TUNER

on the remote control.

2 Press and hold down RDS ASPM on the

remote control.

After “ASPM” has flashed for about 4 seconds, scanning will

start (87.5 MHz to 108 MHz).

After scanning, the number of stations stored in memory will

be displayed for 4 seconds, and then “END” will appear for 4

seconds.

To stop the ASPM operation before it is

complete:

Press  while it is scanning for stations. The stations which

are already stored in memory will be kept there.

Note

• If the same station is broadcasting on different

frequencies, the strongest frequency will be stored in

memory.

• Any station which has the same frequency as the one

stored in memory will not be stored.

• If 30 stations have already been stored in memory, the

scan will be aborted. If you want to redo the ASPM

operation, erase the preset memory.

• If no station have been stored in memory, “END” will

appear for about 4 seconds.

• If the RDS signals are very weak, station names may not

be stored in memory.

• The same station name can be stored in different

channels.

• In a certain area or during certain time periods, the

station names may temporarily be different.

Notes for RDS operation

If any of the following events occur, it does

not mean that the unit is faulty:

• “PS”, “No PS” and a station name appear alternately,

and properly.

• If a particular station is not broadcasting properly or a

station is conducting tests, the RDS reception function

may not work properly.

• When you receive an RDS station whose signal is too

weak, information like the station name may not be

displayed.

• “No PS”, “No PTY” or “No RT” will flash for about 5

seconds, and then the frequency will be displayed.

Notes for radio text:

• The first 8 characters of the radio text will appear and

then they will scroll across the display.

• If you tune in to an RDS station which is not

broadcasting any radio text, “No RT” will be displayed

when you switch to the radio text position.

• While radio text data is received or when the text

contents change, “RT” will be displayed.

STANDBY/ON



CD USB TUNER TIMER

DISPLAY FOLDER

TUNE+

123

456

789

iPod

AUDIO IN

SLEEP

EQUALIZER

P. BA S S

BASS/TREBLE

RANDOM

CLEAR REPEAT

CLOCK

DISPLAY FOLDER

PRESET VOLUME

ST/MONO

MUTE

TUNE–

TUNE+

DIMMER











–

MEMORY

/PROGRAM

ENTER

BT AUDIO

ASPM PTY DISPLAY

RDS

OPTION

Station name (PS) Program type (PTY)

Frequency Radio text (RT)

No RDS

FM 98.80 MHz

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer X-SMC11 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer X-SMC11

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info