Additional Information
28
En
Cannot access the component connected to the network.
The component connected to the network is not properly set. If
the client is automatically authorized, you need to enter the
correspondiag
connection status is set to “Do not authoriz
There are no playable audio f iles on the component connecte
to the network. Check the audio files stored on the component
connected to the network.
Audio playback is undesirably stopped or disturbed.
The audio file currently being
a format playable on this receiver
-
Check whether the audio file wa
supported by this receiver.
-
Check whether the folder has been damaged or corrupte
-
Note that there are cases where even the audio files listed as
playable on this receiver cannot be played back or displayed
(page 22).
The LAN cable is currentsconnected. Connect the LAN
cable properly (page 10).
There is heavy traffic on the network with the Inte
accessed on the same network. Use 100BASE-
the components on the network.
Cannot access Windows Media Player 11 or Windows Media
Player 12.
In case of Windows Medi You are currently logged
onto the domain thro
Windows Vd of logging onto the domain,
log onto the local machine (page 20).
In case of Windows Medi You are currently logged
onto the domain thro
Instead of logging onto the d
machine (page 20).
Cannot listen to Internet radio stations.
The firewall settings for components on the network are
currently in operation. Check the firewall set
components on the network.
Yfrom the Internet.
connection settings for components on the networ
consult with your network ser
(page 21).
The broadcasts from a
interrupted. There are cases where you cannot listen to
Internet radio stations even when they are listed in the list of
Internet radio stations on this receiver (page 20).
The NETWORK function cannot be operated with the
buttons on the remote control.
The remote control is not currently set to the NETWORK
mode. PNETWORK to set the remote control to the
NETWORK mode (page 20).
Troubleshooting of wireless LAN
Network cannot be accessed via wireless LAN.
Wireless LAN converterr is not on (Wire
converter“Wireless” indicators are not
all lit). Check that the USB cable connecting the
converter to the receiverDC OUTPUT for WIRELESS LAN
terminal is properly connected.
The LAN cable is not firmly connected. F
LAN cable (page 10).
Wireless LAN converter and base unit (wireless LAN router
etc.) are too far apart or there is an obstacle between them.
Improve the wireless LAN environment by moving the wireless
LAN converter and base unit closer together
There is a microwave oven or other device generating
electromagnetic waves near the wireless LAN environment.
-
Use the system in a place
others device generating electromagnetic waves.
-
Avoid using devices generating electromagnetic waves as
much as possible when using the system with the wireless
LAN.
Multiple wireless LAN converters are connected to the
wireless LAN routernnecting multiple wireless LAN
converters, their IP addresses mus
if the wireless LAN router
first wireless LAN converter
the second wireless LAN converter
“192.168.1.248”, using values between 2 an
“249” and “248”) that are not assigned to other wireless LAN
converters or to other devices.
Wireless LAN connections cannot be established between the
wireless LAN converter and base unit (wireless LAN router
etc.).
-
With the wireless LAN converter connected to the receiver,
turn the receiver’s power off, unplug the power cord from the
power outlet, then plug the power cord ba
receiver’s power on.
-
The wireless LAN converter must be set in order to establish
wireless LAN connections. For details, refer to the operating
instructions of the wireless LAN converter.
The wireless LAN converter is prected to the
receiver and the wireless LAN converter’s indicators are lit,
but the wireless LAN converter cannot be set from the receiver
(the settings screen cannot be displayed).
If Network Modes in the receiverNetwork Settings is set
to STATIC and the IP adeen set manually
address set in the wireless LAN converter may not match. In
the receiverNetwork Settings , set Network Modes to
DHCP. After the setting is completed
power off. Next, turn the receiver
whether the wireless LAN converter’s settings can be
displayed with the receiver
If the settings c
settings of the receiver a
necessary.
The IP address settings of the receiver and wireless LAN
converter do not match the settings of the wireless LAN
router
Check the IP address sett
LAN converter (including the Network Modes).
If the receiverNetwork Modes is DHCP , turn the receiver’
power off, then turn th
Check that the IP addresse
converter match the settings of the wireless LAN router
If the receiverNetwork Modes is STATIC , set an IP address
matching the network of the ba
etc.).
FoLAN router
“192.168.1.1”, set the receiverIP address to “192.168.1.XXX”
(*1), the subnet mask to “255.255.255.0”, the gateway and
DNS to “192.168.1.1”.
Next, set the wireless LAN converter
“192.168.1.249” (*2).
(*1) Set the “XXX” in “192.168.1.XXX” to a number between 2
and 248 that is not
(*2) Set the “249” in “192.168.1.249” to a number between 2
and 249 that is not
T
The wireless LAN converter can be connected to a computer
to make the advanced wireless LAN settings. F
the CD-ROM included for the wireless LAN converter
the settings of the wireless LAN router
settings of the wireless LAN converter
Note, howev
settings will not necessarily improve the wireless L
environment. Be careful when changing the settings.
The access point is set to conceal the SSID. In this case, the
SSID may not be displayed on the access point list screen
X-HM70_En.fm 28
