Bedienungsanleitung Pioneer XC-HM70DAB-K (Seite 24 von 40) (Englisch)

574072

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Listening to the FM radio

The following steps show you how to tune in to FM radio

broadcasts using the automatic (search) and manual (step)

tuning functions. Once you are tuned to a station you can

memorize the frequency for recall later. See Saving station

presets below for more on how to do this.

1 Press TUNER to select the tuner.

2 Use BAND to change the band “FM“, if necessary.

Each press switches the band between FM (stereo or mono) .

3 Tune to a station.

There are three ways to do this:

Automatic tuning

To search for stations in the currently selected band,

press and hold TUNE / for about a second. The

receiver will start searching for the next station, stopping

when it has found one. Repeat to search for other

stations.

Manual tuning

To change the frequency one step at a time, press

TUNE /.

High speed tuning

Press and hold TUNE / for high speed tuning.

Release the button at the frequency you want.

– Lights when a normal broadcast channel.

– Lights when a stereo FM broadcast is being received in

auto stereo mode.

Improving FM sound

If the or indicators don’t light when tuning to an FM

station because the signal is weak, set the receiver to the

mono reception mode.



Press BAND to select FM MONO.

This should improve the sound quality and allow you to enjoy

the broadcast.

Saving station presets

If you often listen to a particular radio station, it’s convenient

to have the receiver store the frequency for easy recall

whenever you want to listen to that station. This saves the

effort of manually tuning in each time. This unit can

memorize up to 40 stations.

1 Tune to a station you want to memorize.

See Listening to the FM radio above for more on this.

2 Press TUNER EDIT.

The preset number is blinking.

3 Press PRESET

/

to select the station preset you

want.

You can also use the numeric buttons. See Direct track search

on page 14.

4 Press ENTER.

The preset number stop blinking and the receiver stores the

station.

Note

•If the receiver is left disconnected from the AC power

outlet for over a month, the station memories will be lost

and will have to be reprogrammed.

• Stations are stored in stereo. When the station is stored

in the FM MONO mode, it shows as when recalled.

Listening to station presets

You will need to have some presets stored to do this. See

Saving station presets above if you haven’t done this already.



Press PRESET

/

to select the station preset you

want.

You can also use the numeric buttons.

Naming preset stations

For easier identification, you can name all of your preset

stations.

1 Choose the station preset you want to name.

See Listening to station presets above for how to do this.

2 Press TUNER EDIT twice.

The cursor at the first character position is blinking on the

display.

3 Input the name you want.

Choose a name up to eight characters long.

•Use / to select character position.

•Use / to select characters.

• The name is stored when ENTER is pressed.

X-HM70_DAB_En.book 24 ページ２０１１年８月１０日　水曜日　午後２時９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer XC-HM70DAB-K Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info