Bedienungsanleitung Pioneer Xc-HM81 (Seite 24 von 42) (Englisch)

491911

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Internet radio

Network setting

If a broadband router (with built-in DHCP server function) is

connected to this receiver, you can simply turn on the DHCP

server function without having to set up the network

manually. A broadband router without a DHCP server

function connected to this receiver must be set up as

described below. Before you set up the network, consult with

your ISP or the network manager for the required settings.

It is advised that you also refer to the operation manual

supplied with your network component.

Any changes made to a router without the DHCP server

function must be reflected to receiver network settings.

Press

NETWORK



SETUP

The Initial Setup screen is shown on the display.

Select Network

Setting



Network Configuration

Use

/

to select Wired or Wireless, then press

ENTER

Next steps are described separately between Wired Setting

and Wireless Setting. Follow the instructions of the

appropriate network type.

Wired setting

Make sure that the LAN cable connections has completed

(page 10

Use

/

to select DHCP

, then press

ENTER

Select Use Proxy Server to setup Proxy Host Name and

Proxy Port.

If your router does not have a built-in DHCP server

function, you have to set up the network manually. Return

to step 1 and select DHCP to be Off and press

ENTER

When you select DHCP to be Off, go to step 2.

Use

///

or numeric buttons to adjust the

numbers, then press

ENTER

/: Moves the adjusting digit.

/: Increases or decreases values.

IP Address

The IP address to be entered must be defined within the

following ranges. If the IP address defined is beyond the

following ranges, you cannot play back audio files stored

on components on the network or listen to Internet radio

stations.

Class A: 10.0.0.1 to 10.255.255.254 / Class B: 172.16.0.1 to

172.31.255.254 / Class C: 192.168.0.1 to 192.168.255.254

Subnet Mask

If an xDSL modem or a terminal adapter is directly

connected to this receiver, enter the subnet mask listed in

your ISP documentation. In most of the cases, enter

255.255.255.0.

Default Gateway

If a gateway (router) is connected to this receiver, enter

the corresponding IP address.

Primary DNS Server/Secondary DNS Server

If there is only one DNS server address listed in your ISP

documentation, enter Primary DNS Server. In case there

are more than two DNS server addresses, enter

Secondary DNS Server in the other DNS server address

field.

Proxy Setup

Select Use Proxy Server when you connect this receiver

to the Internet via a proxy server. Enter Proxy Host Name

and the port number of your proxy server in the Proxy

Port field.

Wireless Setting

Use

/

to select

Auto

, then press

ENTER

If you setup manually, select Manual.

Wireless

Wired

Network Configuration

DHCP Off

DHCP On

Network Configuration



IP Address

255

255 255 255

Manual

Web Control

iOS Device

Auto

Wireless

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer Xc-HM81 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer Xc-HM81

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info