Bedienungsanleitung Pioneer XC-P01-s-k (Seite 26 von 30) (Englisch)

574312

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Additional information

Troubleshooting chart

Many potential problems can be resolved by the owner

without calling a service technician.

If something is wrong with this product, check the following

before calling your authorized PIONEER dealer or service

centre.

General

The clock is not set to the correct time.

 Did a power failure occur?

 Reset the clock. (Refer to page 13)

When a button is pressed, the unit does not respond.

 Have you correctly selected the stereo receiver or CD player

using the CONTROL RCV or CONTROL CD button on the

remote control before using the function button?

 Set the unit to the power stand-by mode and then turn it back

on.

 If the unit still malfunctions, reset it. (Refer to page 27)

No sound is heard.

 Is the volume level set to “Min”?

 Is the volume muted?

 Are the headphones connected?

 Are the speaker wires disconnected?

CD player

Playback does not start.

Playback stops in the middle or is not performed properly.

 Is the disc loaded upside down?

 Does the disc satisfy the standards?

 Is the disc distorted or scratched?

Playback sounds are skipped, or stopped in the middle of a

track.

 Is the unit located near excessive vibrations?

 Is the disc very dirty?

 Has condensation formed inside the unit?

Remote control

The remote control does not operate.

 Is the AC power lead of the unit plugged in?

 Is the battery polarity correct?

 Are the batteries dead?

 Is the distance or angle incorrect?

 Does the remote control sensor receive strong light?

 Are the stereo receiver and CD player connected correctly

with the supplied remote control cable and RCA audio cable?

Tuner

The radio makes unusual noises continuously.

 Is the unit placed near the TV or computer?

 Is the FM aerial placed properly? Move the aerial away from

the AC power lead if it is located nearby.

DAB

DAB reception is poor.

 Check the connections, and adjust the location and position

of aerial. After that, execute Auto Scan function manually.

(Refer to page 23)

 If the reception environment changed by removal, etc.,

execute Auto Scan function manually. (Refer to page 23)

USB

Device cannot be detected.

 Is there any MP3/WMA/WAV file available?

 Is the device properly connected?

 Is it an MTP device?

Playback does not start.

 Is it a copyright protected WMA file?

 Is it a false MP3 file?

iPod/iPhone/iPad mini

No sound is produced.

 The iPod/iPhone/iPad mini is not playing.

 The iPod/iPhone/iPad mini is not properly connected to the

unit.

 Is the AC power lead of the unit plugged in?

 Audio of iPod/iPhone/iPad mini cannot be heard via the

headphones connected to the unit.

 Audio of iPod/iPhone/iPad mini is not output from the

COAXIAL OUT socket of the CD player.

iPod/iPhone/iPad mini will not charge.

 The iPod/iPhone/iPad mini is not making full contact with the

connector.

 The iPod/iPhone/iPad mini is not supported. Refer to

Supported models on page 19 for compatible models.

“This accessory is not made to work with iPhone” or “This

accessory is not supported by iPhone” appears on iPhone

screen.

 iPhone is not properly docked.

Condensation

Sudden temperature changes, storage or operation in an

extremely humid environment may cause condensation

inside the cabinet (CD pickup, etc.) or on the transmitter on

the remote control. Condensation can cause the unit to

malfunction. If this happens, leave the power on with no disc

in the unit until normal playback is possible (about 1 hour).

Wipe off any condensation on the transmitter with a soft

cloth before operating the unit.

If problem occurs

When this product is subjected to strong external

interference (mechanical shock, excessive static electricity,

abnormal supply voltage due to lightning, etc.) or if it is

operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

1 Set the unit to the stand-by mode and turn the power

on again.

2 If the unit is not restored in the previous operation,

unplug and plug in the unit again, and then turn the

power on.

Note

• If neither operation above restores the unit, clear all the

memory by resetting it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer XC-P01-s-k Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer XC-P01-s-k

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info