Bedienungsanleitung Pioneer XDJ-1000 (Seite 7 von 36) (Englisch)

574224

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Connections

! Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.

! Refer to the operating instructions for the component to be connected.

! Connect the power cord after all the connections between devices have been completed.

! When using a LAN cable for connection, be sure to use either the LAN cable included with this product or an STP (shielded twisted pair) cable.

! Do not disconnect the LAN cable when music files and/or information are being shared using PRO DJ LINK.

Descriptions of terminals

4523

1 CONTROL terminal

This is used to interconnect DJ players with a monaural mini phone

plug (Ø 3.5 mm) cable (commercially available) to send control

signals for relay playback.

= Connections for relay play (p. 10 )

2 AC IN

Connect this to a power outlet.

Connect the power cord after all the connections between devices

have been completed.

Be sure to use the included power cord.

3 AUDIO OUT L/R terminals

Connect the audio cables (included) here.

4 LINK terminal

Connect the LAN cable (included) here.

5 USB port

Connect to a computer.

Basic style

Playback on this unit is performed mainly using tracks prepared with rekordbox installed on a computer.

! For rekordbox operations, see the rekordbox (Mac/Windows) user’s manual. You can see the rekordbox (Mac/Windows) user’s manual from [Help]

menu of rekordbox (Mac/Windows).

! Also, for DJ players and DJ mixers, up to four PRO DJ LINK-compatible players can be connected with LAN cables (CAT5e) using PRO DJ LINK

connections.

! A switching hub (commercially available) may be necessary, depending on the combination of models used. Use a switching hub of 100 Mbps or

greater. Some switching hubs may not operate properly.

! A switching hub (commercially available) is necessary to connect to a mixer equipped with only one LAN port. For mixers with enough LAN ports for

all the DJ players and computers in the system, connect directly to the LAN ports on the mixer’s rear panel, without using a hub.

! Use the wireless router (available in the market) and access point (available in the market) which can obtain a sufficient communication speed

such as IEEE802.11n, IEEE802.11g etc. Depending on the signal conditions in the usage environment or the wireless router and access point, PRO

DJ LINK connections may not operate properly.

Connecting to a mixer with only one LAN port

When connecting to a mixer with only one LAN port using a switching hub, for optimum usage of rekordbox’s music file management functions, set

the channel number of the mixer to which the audio cable is connected and the player number displayed at the bottom left of the main unit display

section to the same number.

(Ex.: When the audio cable is connected to channel 1)

Audio cable

PHONO

CH 1

CD/ LINE

AL GND

PLAYER

CH 1

Connections

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer XDJ-1000 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer XDJ-1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info