Bedienungsanleitung Pioneer XDJ-AERO (Seite 35 von 37) (Englisch)

491973

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Additional information

DJ software

Problem Check Remedy

DJ software on a computer cannot be

operated.

Is the driver software properly set? Set the driver software properly. (Page 8)

DJ software’s sound is not properly

output.

Are the DJ software’s output settings and this

unit’s [MIXER MODE] setting properly set?

Check the DJ software’s settings, then check this unit’s settings on the

[UTILITY] screen and set the proper signal path. (page 26)

Sound of the DJ software is not

output.

Are the connection cables properly connected? Connect the connection cables properly. (page 10)

Is the included USB cable properly connected? Connect the computer and this unit directly using the included USB cable. USB

hubs cannot be used. (page 10)

Are terminals or plugs dirty? Wipe any dirt off terminals and plugs before connecting.

Are the connected components and amplifiers

properly set?

Set the external input selection and volume on the components and amplifiers

properly.

Is this unit’s [MIXER MODE] properly set? Set this unit’s [MIXER MODE] according to the DJ software’s audio output

settings. (page 26)

Sound being played is interrupted

when using DJ software.

Is the driver software’s latency value suitable? Set the driver software’s latency to a suitable value. (Page 8)

Set the DJ software’s latency to a suitable value.

Wireless LAN

Problem Check Remedy

Tracks cannot be loaded via wireless

connection.

Is the wireless LAN connection properly

connected?

Is the link established?

Connect the mobile device or computer and this unit properly by wireless LAN.

(page 11)

For instructions on establishing the link, see the User’s Manual for rekordbox

(iOS/Android) or the Operating Instructions for rekordbox (Mac/Windows).

Are over four mobile devices or computers

connected?

The maximum total number of units (computer and/or mobile devices) that can

be connected simultaneously is four. Disconnect unnecessary connections at

[LINK DISCONNECT] on the [UTILITY] screen. (page 24)

Is the [LOAD LOCK] function on? Set [LOAD LOCK] on the [UTILITY] screen to [OFF], or pause the currently play-

ing track before loading. (page 27)

Links cannot be established. Is the wireless LAN connection properly

connected?

Connect the mobile device or computer and this unit properly by wireless LAN.

(page 11)

For instructions on establishing the link, see the User’s Manual for rekordbox

(iOS/Android) or the Operating Instructions for rekordbox (Mac/Windows).

Are over four mobile devices or computers

connected?

The maximum total number of units (computer and/or mobile devices) that can

be connected simultaneously is four. Disconnect unnecessary connections at

[LINK DISCONNECT] on the [UTILITY] screen. (page 24)

Are you using this unit for something other than

loading tracks?

When using this unit as an access point, using it for something other than load-

ing tracks may hinder DJ performances.

Track loading does not finish or is

slow.

Jog dial indicator does not stop

flashing.

Is the wireless LAN connection properly

connected?

Is the link established?

Connect the mobile device or computer and this unit properly by wireless LAN.

(page 11)

For instructions on establishing the link, see the User’s Manual for rekordbox

(iOS/Android) or the Operating Instructions for rekordbox (Mac/Windows).

Are 2 tracks being loaded simultaneously?

Is the device to which you are trying to transfer the

track far away?

Are other wireless signals being used nearby?

In these cases, track loading may be slow.

Loop playback starts suddenly on

tracks loaded via wireless LAN.

Is the wireless LAN connection properly

connected?

The wireless LAN connection may have been cut. Check the connection status.

(Emergency loop function)

Connection with mobile device is not

possible, mobile device cannot be

operated or no sound is produced.

Is there a device producing electromagnetic waves

in the 2.4 GHz band (microwave oven, other wire-

less LAN device, etc.) nearby?

Either install this unit away from the device producing electromagnetic waves or

stop using the device producing electromagnetic waves.

Are the mobile device and this unit too far apart or

is there an obstacle between them?

Install in the same room within a line-of-sight distance (with no obstacles) of 40

meters. (This line-of-sight distance is rough indication. The actual distance at

which communications are possible may differ, depending on the surrounding

environment.)

Error messages

When this unit cannot operate normally, an error code appears on the display. Check the table below and take the measures indicated. If an error code

not shown on the table below is displayed, or if the same error code is displayed again after taking the indicated action, contact your store of purchase

or a nearby Pioneer service station.

Error code Error type Description of error Cause and action

E-8304 DECODE ERROR

Music files that cannot be played normally are loaded.

The music files are not in an authorized format.

Replace them with music files in an authorized

format.

E-8305 DATA FORMAT ERROR

E-8306 NO FILE

Track recorded in the library, playlist, etc., has been

deleted from the USB device and cannot be played.

To play the track, load it back onto the USB device.

Pioneer XDJ-AERO Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer XDJ-AERO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info