Bedienungsanleitung Pioneer XN-P02 (Seite 29 von 54) (Englisch)

611811

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Playback with NETWORK features (Network audio player: N-P01)

This player can play audio files stored on computers or other

components on a Local Area Network (LAN).

Introduction

This player allows you to listen to audio files on a computer or

other component connected to the player via LAN interface.

This chapter describes the setup and playback procedures

required to enjoy these features. It is advisory that you also

refer to the operation manual supplied with your network

component.

Note

•

Photo or video files cannot be played back.

•

With Windows Media Player 11 or Windows Media Player

12.

About playable DLNA network devices

This player allows you to play music on media servers

connected on an identical Local Area Network (LAN) as the

player. This player allows you to play files stored on the

following devices:

•

Computers running Microsoft Windows Vista with

Windows Media Player 11 installed

•

Computers running Microsoft Windows 7 or 8 with

Windows Media Player 12 installed

•

DLNA-compatible digital media servers (on computers or

other components)

Files stored in a computer or DMS (Digital Media Server) as

described above can be played via command from an external

Digital Media Controller (DMC). Devices controlled by this

DMC to play files are called DMRs (Digital Media Renderers).

This player supports this DMR function.

When this player is selected as a DMR and DMS playback is

begun, the player’s input automatically switches to DMR.

During DMR input, the currently playing track name, artist

name, album name, and album art will appear on the player’s

display (some information may not be displayed, depending

on the file being played).

When in the DMR mode, such operations as playing and

stopping files can be performed from the external controller.

Volume adjustment and the muting control are also possible.

Note

•

Depending on the external controller being used, playback

may be interrupted when the volume is adjusted from the

controller. In this case, adjust the volume from the player or

remote control.

Using AirPlay on iPod touch, iPhone, iPad and

iTunes

AirPlay works with iPhone, iPad, and iPod touch with iOS

4.3.3 or later, Mac with OS X Mountain Lion or later, and PC

with iTunes 10.2.2 or later.

To use AirPlay, select your player on your iPod touch, iPhone,

iPad or in iTunes and start playback. For more information,

see the Apple website (http://www.apple.com).

•

Adjustment of the player’s volume from iPod touch,

iPhone, iPad or iTunes.

•

Pause/resume, next/previous track, and shuffle/repeat

from the remote control of the player. The display will not

show the Play Status, Repeat, or Shuffle icons.

•

Display of the currently playing track information on the

player’s display, including artist, song/album name and

album artwork. It may not be displayed other than song

name.

Tip

•

A network environment is required to use AirPlay.

•

The player’s name that shows up in the AirPlay UI on iPod

touch, iPhone, iPad and iTunes can be changed by

Friendly Name from Network Setting.

•

AirPlay provided on this player has been developed and

tested based on the software versions for the iPod touch,

iPhone, iPad and the software versions for iTunes that are

indicated on the Pioneer website. AirPlay may not be

compatible with iPod touch, iPhone, iPad or iTunes

software versions other than those indicated on the Pioneer

website.

About the DHCP server function

To play back audio files stored on components on the network,

you must turn on the DHCP server function of your router.

In case your router does not have the built-in DHCP server

function, it is necessary to set up the network manually.

Otherwise, you cannot play back audio files stored on

components on the network or listen to Internet radio

stations. See Network setting

on page 21 for more on this.

Authorizing this player

This player must be authorized to enable playback. The player

is automatically authorized when it is connected to a

computer over a network. If not, please authorize this player

manually on the computer. The authorization (or permission)

method for access varies depending on the type of server

currently being connected. For more information on

authorizing this player, refer to the instruction manual of your

server.

Playing audio files stored on computers or

other components

Connecting to the LAN network

Be sure to connect computer or other components to the

network using the LAN interface before you use this function.

For details on the connections, see page 12

Playback with Music Server

Important

•

You cannot access a computer on a network while you are

logged onto a domain that is configured in a Windows

network environment. Instead of logging onto the domain,

log onto the local machine.

•

There are cases where the time elapsed may not be

correctly displayed.

Press M.SERVER to select Music Server.

All available servers are shown on the display. “Please

wait” will be displayed until an available server is found.

Use

/

to select the server that the file you want to

play is stored on, then press ENTER.

The folders/files stored on the server are shown on the

display.

Pioneer XN-P02 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer XN-P02

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info