Bedienungsanleitung Pioneer XN-P02DAB (Seite 45 von 54) (Englisch)

611812

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Getting started (Stereo receiver: SX-P01, SX-P01DAB)

Muting

The volume is muted temporarily when pressing the MUTE

button on the remote control. Press again to restore the

volume.

DIRECT function

Press the DIRECT button on the remote control or on the

stereo receiver to listen to the sound source in the original

sound quality. The DIRECT indicator lights in the front panel

display of the stereo receiver when the DIRECT function is on.

Press the DIRECT button again to cancel the DIRECT

function.

Note

•

If the DIRECT function is turned off when the volume is set

to 61 or higher, the volume is automatically set to 60.

Bass control

Press the BASS + button on the remote control to emphasize

the bass, and the BASS– button to de-emphasize it.

Note

•

This function is not available when the DIRECT function is

on.

Treble control

Press the TREBLE + button on the remote control to

emphasize the treble, and the TREBLE– button to de-

emphasize it.

Note

•

This function is not available when the DIRECT function is

on.

Input selection

The input source for the stereo receiver can be selected by

pressing each input selection button (CD/USB, TUNER,

NETWORK, and DIG IN 1/2) on the remote control, or turning

the SOURCE knob on the stereo receiver.

Note

•

If pressing the INPUT button on the remote control

repeatedly or turning the SOURCE knob on the stereo

receiver to the right, the input source is switched in the

following order.

If turning the SOURCE knob to the left, the order is reversed.

•

The backup function will memorize the input mode and

restore it in case of a power failure or that the AC power

cord is disconnected.

Headphones

Plug headphones (commercially available) into the PHONES

socket on the stereo receiver.

•

Do not turn the volume on to full at switch on and listen to

music at moderate levels. Excessive sound pressure from

earphones and headphones can cause hearing loss.

•

Before plugging in or unplugging the headphone, reduce

the volume.

•

Be sure your headphone has a 3.5 mm diameter plug and

impedance between 16 and 50 ohms. The recommended

impedance is 32 ohms.

•

Plugging in the headphone disconnects the speakers

automatically.

Auto power down setup

The unit turns off automatically if no operations are performed

for specified period of time.

•

Default setting: 6H

Press the CONTROL RCV button on the remote control.

Press the

SETUP

button.

Press

/

to specify the amount of time.

You can select 2, 4 or 6 hours, or off (if no automatic

shutoff is desired).

Press the

ENTER

button.

Note

•

Press the RETURN button to exit the setting mode without

setting the auto power down function.

CAUTION

•

If setting the auto power down for the stereo receiver, both

of the stereo receiver and CD player are automatically

turned off after the specified period of time has elapsed. If

setting the auto power down for the CD player, only the CD

player is automatically turned off after the specified period

of time has elapsed.

TUNER

DIGITAL IN 1

CD/USB NETWORK

DIGITAL IN 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer XN-P02DAB Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer XN-P02DAB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info