Bedienungsanleitung Pioneer XV-BD121W (Seite 77 von 588) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

491940

Zoom out

Zoom in

Vorherige Seite

1/588

Nächste Seite

Advanced settings 77

Advanced settings

Setting Options Explanation

Audio Output

DRC (Dynamic Range

Control)

Off Select this to output audio signals without using the DRC function.

On Select this to adjust the range between the loudest and softest sounds

(dynamic range) for playback at average volume. Use this when it is hard to

hear dialog or when watching movies at midnight.

Auto

Select to switch the DRC setting On/Off automatically according to the input

audio signal from the disc. This only affects Dolby TrueHD signals.

•ThisaffectssuchaudiosignalsasDolbyDigital,DolbyTrueHD,andDolbyDigitalPlus.

•Dependingonthedisc,theeffectmaybeweak.

Speaker Setup Adjust the Trim (output level) and Delay (distance from viewers) of the speakers.

Please see "Adjust speaker settings" for more details (page 80).

Test Tone Output a test tone from the speakers.

HDMI

Color Space RGB Select this to output the video signals as RGB signals. Choose this if the

colors seem too faint and the black seems too bright.

YCbCr Select this to output the video signals as YCbCr 4:4:4 signals.

YCbCr 422

Select this to output the video signals as YCbCr 4:2:2 signals.

Full RGB Select this to output the video signals as RGB signals. Choose this if the

colors seem too dense and all the dark colors are displayed in a uniform

black.

Resolution

Auto

Select this to choose the resolution of the video signals output from the

HDMI OUT

terminal automatically.

480I/576I Output the video signals from the

HDMI OUT

terminal with the selected

resolution.

The resolution can be changed by pressing

RESOLUTION

, but Auto cannot be

selected.

480P/576P

720P

1080I

1080P

HDMI Audio Out Bitstream Select this to output HDMI audio signals directly.

PCM

Select this to output HDMI audio signals converted to 2-channel audio

signals.

Reencode WhenaBDcontainingsecondaryaudioandinteractiveaudioisplayed,the

two audio signals are mixed and converted to DTS audio for output.

Off Select this when you do not want to output the audio signal from the HDMI

output terminal.

Control

Select this to control the player with the remote control of the connected AV

device using an HDMI cable. Also refer to page 41.

Off Select this when you do not want to control the player with the remote

control of the connected AV device using an HDMI cable.

HDMI Deep Color 30bits Select this when outputting the video signals with 30-bit color.

36bits Select this when outputting the video signals with 36-bit color.

O

Select this when outputting the video signals with normal 24-bit color.

HDMI 1080P 24Hz

Select this when Resolution is set to

Auto

or 1080P and outputting 1080p/24

video signals to a TV compatible with 1080p/24.

Off Select this when Resolution is set to 1080P and outputting 1080p/60 video

signals to a TV compatible with 1080p/60.

HDMI 3D

Auto

With3Ddiscs,thediscisplayedwith3Dimages.

Off 3D images are not played.

3D Notice

Yes

This sets whether or not to display the 3D notice when playing 3D images.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer XV-BD121W Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer XV-BD121W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info