Bedienungsanleitung Pioneer XW-SMA3 (Seite 39 von 48) (Englisch)

491797

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Additional information 09

Wireless LAN

Problem Check Remedy

Network cannot be accessed

via wir eless LAN.

The computer may determine the presence/absence of a wireless

LAN in accordance with the presence/absence of the cable at the

time the unit’s power is turned on. When using a wireless LAN,

disconnect the LAN cable from this unit and then turn the unit OFF

and ON again.

This unit and base unit (wireless LAN

router, etc.) are too far apart or there

is an obstacle between them.

Improve the wireless LAN environment by moving the unit and

base unit closer together, etc.

There is a microwave oven or other

device generating electromagnetic

waves near the wireless LAN

environment.

Use the system in a place away from microwave ovens or others

device generating electromagnetic waves.

Avoid using devices generating electromagnetic waves as much as

possible when using the system with the wireless LAN.

Wireless LAN connections cannot be

established between the unit and

base unit (wireless LAN router, etc.).

The unit must be set in order to establish wireless LAN

connections. See Connecting using wireless LAN on page 12.

The IP address settings of the unit

does not match the settings of the

wireless LAN router, etc.

Check the IP address settings of the unit (including the DHCP

setting).

If the unit’s DHCP setting is on, turn the unit’s power off, then turn

the power back on.

Check that the IP addresses of the unit match the settings of the

wireless LAN router, etc.

If the unit’s DHCP setting is off, set an IP address matching the

network of the base unit (wireless LAN router, etc.).

For example, if the wireless LAN router’s IP address is

“192.168.1.1”, set the unit’s IP address to “192.168.1.XXX” (*1), the

subnet mask to “255.255.255.0”, the gateway and DNS to

“192.168.1.1”.

(*1) Set the “XXX” in “192.168.1.XXX” to a number between 2 and

248 that is not assigned to other devices.

The access point is set to conceal the

SSID.

In this case, the SSID may not be displayed on the access point list

screen. If not, set the SSID, etc., by making the wireless LAN

settings on the unit manually.

The SSID only supports use of single-byte alphanumeric characters,

together with the underbar and certain other symbols. If using

another character coding, the SSID must be updated before making

network settings. For more details regarding SSID, consult your

router's operating instructions.

The access point’s security settings

use WEP 152-bit length code key or

shared key authentication.

The unit does not support WEP 152-bit length code key or shared

key authentication.

It may be that the router has frozen. Press the router’s reset button

and try making the settings again.

Doesn’t play properly when

using the Wireless Direct

function.

The Wireless Direct function may not operate properly depending

on the condition of signal reception and the wireless LAN device

connected. In such cases, bring the wireless devices closer

together and in other ways improve the conditions for wireless

LAN’ reception.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer XW-SMA3 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer XW-SMA3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info