62
WARNING! The veneering of cabinets has to be fixed with a heat-
resistant glue, that is able to withstand a temperature of 120
0
C.
WARNING! Adjacent furniture or housing and all materials used for
installation must be able to resist a temperature of min. 85
0
C above the
ambient temperature of the room the appliance is installed in during
operation.
CAUTION! When installing the appliance ensure optimal heat
radiation to maintain the operating safety.
CAUTION! The wall and the reach of the heat radiation above the
worktop must be made of heat-resistant materials.
CAUTION! To avoid any damage, the sandwich layer and adhesive
must resist heat.
The customer is responsible for the installation. If the manufacturer´s help is
needed to repair any damage due to improper installation, this repair work is not
covered by the guarantee. Improper installation may cause serious personal
injuries and/or property damage. The manufacturer cannot be held liable for such
injuries or damages.
2.1 Unpacking and positioning
1. Unpack the appliance carefully. Dispose of the packaging as described in chapter
WASTE MANAGEMENT.
2. The accessories of the appliance may be equipped with transport protections. Be
very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport protection.
3. Check that the appliance and the power cord are not visible damaged.
4. Do not install the appliance in a place where it may come in contact with water
or rain; otherwise the insulation of the electrical system will be damaged.
5. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
6. Connect the appliance to the mains properly.
7. Remove the complete packaging material (inside and outside the appliance)
before initial operation.
8. The rating plate is inside the appliance or at the back.
