43
CAUTION!
1. The condenser and the compressor, located at the rear of the
appliance (positioning depending on model), can reach high
temperatures during ordinary operation. Carry out the installation
according to this manual. An insufficient ventilation of the appliance
will impair its operation and will damage the appliance. Do not cover
or block the ventilation slats at any time.
2. Do not touch the extremely cooled surfaces with wet or damp
hands, because your skin may stick on these surfaces.
NOTICE!
1. Do not store dry ice in the appliance.
2. When you move the appliance using the rollers (depending on
model), only move it forwards or backwards as the rollers are not
pivotable and do not allow any lateral motion. Lateral motion can
damage the appliance and floor seriously.
3. Do not tilt the appliance more than 45
0
.
4. If the appliance is transported in a horizontal position, some oil may
flow from the compressor into the refrigerant circuit.
5. Leave the appliance in an upright position for 4 - 6 hours before
you switch it on to ensure, that the oil has flowed back into the
compressor.
6. If you use the appliance for the first time or the appliance has been
disconnected from the mains for a longer period of time, allow the
appliance to cool down for 3 until 4 hours on medium temperature
setting before you place any fresh food in the appliance. If you
place food in the appliance before it has reached its normal
operating temperature, this foods can spoil.
7. Never use the door for moving the appliance as you will damage
the hinges.
8. The appliance must be transported and installed by at least two
persons.
9. When you unpack the appliance, you should take note of the
position of every part of the interior accessories in case you have to
repack and transport it at a later point of time.
10. Do not operate the appliance unless all components are installed
properly.
11. Do not stand or lean on the base, the drawers, the doors etc of the
appliance.
