Bedienungsanleitung Plantronics Savi W710-M (Seite 27 von 35) (Englisch)

670676

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

NOTE To connect a guest headset that is of a different variety to the primary headset, short press

the base subscription button while the base has an active link. Next, press the guest headset volume

up button until the indicator light turns on. When the base subscription LED stops flashing green and

yellow and remains solid yellow, the request to join will be heard in the primary user’s headset and

the primary user will have to press their call button within 10 seconds to accept the guest.

Exit a conference call

Guests’ headsets can remain as guests through multiple calls.

To remove a guest headset, press the guest headset’s call button or dock the primary user’s

headset in the charging cradle.

A single tone in the master headset will be heard as each guest leaves the call.

View guest headsets

As you add headsets to the base, an additional headset icon will appear in the Plantronics hub

screen with a number from 1 to 3 indicating the number of additional headset subscribed to the

base. The first headset is the primary user’s headset and the number inside the next headset is

the number of guest headsets subscribed to the base. The following example shows one primary

headset with two guest headsets conferenced in.

Your Savi 700 Series headset system (v28 or later) supports DECT Forum recommendations

for Enhanced security. Products with Enhanced security are marked with the DECT Forum

security logo on the base.

Both your headset and headset base are compatible with older (prior to v28) headset bases

and headsets supporting older versions of DECT. Below is helpful information if you plan to use

Enhanced security and older DECT components together.

If your Enhanced security headset or headset base is conferenced with an older headset or

headset base the resulting security level for the mixed headset and base combination will be

set to the level of the older version of DECT for all calls. This is because older system

components are not able to support Enhanced security.

All subscription details above apply when conferencing an Enhanced security headset to an

older base, or vice versa, however there are unique system alerts indicating that the system is

changing the security level from Enhanced security to the older version of security.

If an older headset is subscribed to an Enhanced security base:

• The subscription LED (lower left) will flash GREEN 3 times followed by YELLOW 2 times. This

flash pattern repeats 2 times.

If an Enhanced security headset is subscribed to an older base:

• The Enhanced security headset will play a security notification tone.

• The mono-coloured LED on the headset will flash 3 times, then 2 times. This flash pattern is

repeated 2 times.

Conferencing additional

headsets and Security

levels

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Plantronics Savi W710-M Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Plantronics Savi W710-M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info