Bedienungsanleitung Plantronics VOYAGER 510-USB (Seite 7 von 10) (Englisch)

670711

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

0 0

To make a call, simply dial the number via your softphone application.

To answer or end a call, press the call control button.

When using PerSono Suite, the radio link between the headset and the USB Bluetooth

adapter will only be active during a call. This is the default setting intended to preserve

the battery life of the headset. However, you may wish to have the radio link active when

not on a call so you can listen to other audio sources, such as streaming audio on your PC.

NOTE: Locking the radio link on for extended periods of time will significantly reduce the

standby and talk time of the headset.

For softphones not compatible with PerSono Suite

Check the PerSono Suite compatibility list at www.plantronics.com/SoftphoneCompatibility

for the most current information on softphone compatibility.

If your softphone is not currently supported by PerSono Suite, remote detection and

answer/end via the headset does not function. Pressing the call control button on the

headset will only open and close the radio link providing audio; you must answer the call

from the softphone.

To answer or end a call, briefly press the call control button.

To make a call, enter number on your phone, press send and the call is automatically

transferred to headset; no need to press the call control button.

1312

USING YOUR HEADSET

Additional features

Only with mobile phone

Answering/ending/making calls

with PerSono Suite on softphone

Redialling last number

To activate last number redial, double-

click the call control button. You will

hear a high tone for each key press.

When you hear a further tone, the last

number has been redialled.

Rejecting a call

When receiving an incoming call, press

and hold the call control button. You will

hear a tone. When you hear a second

tone, the call has been rejected and you

can release the button.

Using voice dialling

With the headset on, press and hold

the call control button for 2 seconds,

until you hear a second tone, to activate

voice dialling.

NOTE: To use voice activated dialling, the

voice dialling feature must be enabled on

your phone. See your Bluetooth phone

manual for instructions.

Switching a call from phone to headset

To switch an active call from your phone

to your headset, briefly press the call

control button.

Switching a call from headset to phone

To switch an active call from your

headset to your phone, press and hold

the call control button until you hear a

tone. When you hear a second tone, the

transfer has been completed and you can

release the button.

Answering/ending/making calls

with mobile phone

The Voyager 510-USB headset has Multipoint Technology which allows you to switch

seamlessly between two audio devices. You can answer a call from either your PC-based

softphone or your mobile phone by pressing the call control button. The headset must be

paired to both devices.

Multipoint versatility

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Plantronics VOYAGER 510-USB Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Plantronics VOYAGER 510-USB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info