Bedienungsanleitung Polar M460 (Seite 28 von 74) (Englisch)

691220

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

• GPS recording: Choose Off or On.

• Calibrate power sensor: Power sensor calibration is visible only if you have paired the sensor. For more inform-

ation on calibration, see Polar LOOK Kéo Power Sensor Bluetooth® Smart.

• Bike settings: Used sensors: View all the sensors you have linked to the bike.

• Calibrate altitude: Set the correct altitude. It is recommended to always manually calibrate altitude when you

know your current altitude.

• Speed settings: Speed view: Choose km/h (kilometers per hour) or min/km(minutes per kilometer). If you

have chosen imperial units, choose mph (miles per hour) or min/mi (minutes per mile). Check speed zone

limits: Check the limits for each speed zone.

• Automatic pause sett.: Automatic pause: Choose On or Off. If you set the automatic pause On, your ses-

sion is automatically paused when you stop moving. Activation speed:set the speed at which recording is

paused.

• Automatic lap: Choose Off, Lap distance or Lap duration. If you choose Lap distance, set the distance

after which each lap is taken. If you choose Lap duration, set the duration after which each lap is taken.

In training view, press and hold LIGHT to enter Quick menu. You'll find:

• Lock buttons: Press START to lock buttons. To unlock, press and hold LIGHT.

• Set front light on or off.

• Set backlight on or off.

• Calibrate power sensor: Power sensor calibration is visible only if you have paired the sensor. For more inform-

ation on calibration, see Polar LOOK Kéo Power Sensor Bluetooth® Smart.

• Calibrate altitude: Set the correct altitude. It is recommended to always manually calibrate altitude when you

know your current altitude.

• Interval timer: Create time and/or distance based interval timers to precisely time work and recovery phases in

your interval training sessions.

• Current location info*: Current location and the number of visible satellites.

• Choose Set location guide on*, and press START. Location guide arrow view set on is displayed, and

M460 goes to Back to Start view.

*This selection is only available if GPS is set on for the sport profile.

In pause mode, press and hold LIGHT to enter Quick menu. You'll find:

• Lock buttons: Press START to lock buttons. To unlock, press and hold LIGHT.

• Set front lighton or off.

• Training sounds: Choose Off, Soft, Loud or Very loud.

• Heart rate settings: Heart rate view: Choose Beats per minute (bpm) or % of maximum. Check HR

zone limits: Check the limits for each heart rate zone. HR visible to other device: Choose On or Off. If you

choose On, other compatible devices (e.g. gym equipment) can detect your heart rate.

• Bike power settings: Power view: Set how you want to view your power data (Watts (W), Watts/kg (W/kg)

or % of FTP). Power, rolling average: Choose 1, 3, 5, 10, 15, 30 or 60 second rolling average of power data. Set

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polar M460 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polar M460

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info