691220
32
Zoom out
Zoom in
Vorherige Seite
1/74
Nächste Seite
32
If you have set the GPS function on in this sport profile and/or a compatible Bluetooth® Smart sensor in use,
M460 will automatically start searching for the signals.
Stay in the pre-training mode until M460 has found the GPS and sensor signals and your heart
rate to make sure your training data is accurate. To catch the GPS satellite signals, go outdoors and
away from tall buildings and trees. Keep your M460 still with the display facing upwards during the search. Hold
the position until M460 has found the satellite signals.
Finding GPS satelllite signals is faster with the help of assisted GPS (A-GPS). The A-GPS data file is automatically
updated to your M460 when you sync your M460 with the Flow web service via the FlowSync software. If the
A-GPS data file has expired or you haven't synced your M460 yet, more time may be needed for finding the
satellite signals. For more information, see Assisted GPS (A-GPS).
3. When M460 has found all the signals, press START. Recording started is displayed and you can
start training.
Heart rate: M460 has found your heart rate sensor signal, when your heart rate is shown.
GPS: The percentage value shown next to the GPSicon indicates when the GPS is ready. When it reaches 100 %,
OK is displayed.
Cycling sensors: OK is shown next to the bike icon when M460 has found the sensor signals. If you have
linked sensors to more than one bike, you'll see a number next to the bike icon indicating the bike in use. M460
chooses the bike to which the nearest sensor is linked.
Example:
You've linked a speed sensor to Bike 1, and another speed sensor to Bike 2. Both bikes are nearby when you
enter the pre-training mode in M460. The speed sensor linked to Bike 1 is closer to the M460. Therefore, M460
chooses Bike 1 for the ride. Number 1 is shown next to the bike icon.
If you wanted to use Bike 2 instead, do either of the following:
Return to the time mode. Then, increase the distance between M460 and Bike 1 so that Bike 2 is the one
nearest to M460. Enter the pre-training mode again.
Touch the sensor in Bike 2 with M460.
32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Polar M460 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Polar M460

Polar M460 Bedienungsanleitung - Deutsch - 78 seiten

Polar M460 Kurzanleitung - Deutsch - 2 seiten

Polar M460 Kurzanleitung - Englisch - 2 seiten

Polar M460 Kurzanleitung - Holländisch - 2 seiten

Polar M460 Bedienungsanleitung - Holländisch - 77 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info