STEP-BY-STEP INSTRUCTIONS
FOR SETTING THE ALARM
1. In the time of day display,
press the
SET button twice.
The letters
ALM and the alarm
time, 10:00, will appear on
the display, as shown (or
any other previously set
alarm time).
2. The AM or PM indicator is
flashing now.
3. At this point, select AM or PM
as you did above, by pressing
the
SELECT button.
4. Press
STORE/LAP to lock in your choice.
5. At this point, the first two digits, representing
the hours, are flashing.
6. Set the correct hour by moving up with the
SELECT button or down with the SIGNAL/
LIGHT button.
7. When the correct hour is displayed, press
the
STORE/LAP button to lock in your
selection.
8. The full ten minutes digit is flashing now.
Again, use the
SELECT button to move up,
or the
SIGNAL/LIGHT button to move
down.
4. At this point, the first two digits (representing
the hours) are flashing.
5. Set the correct hour by moving up with the
SELECT button or down with the
SIGNAL button.
6. When the correct hour is displayed, press
the
STORE/LAP button to lock in your
selection.
7. The full ten minutes digit flashes now. Again,
use the
SELECT button to move up, or the
SIGNAL/LIGHT button to move down.
8. When the correct number is displayed,
press the
STORE/LAP button to lock in
your selection.
9. The one minutes digit is flashing now. Again,
use the
SELECT button to move up, or the
SIGNAL/LIGHT button to move down.
10. When the number you want is displayed,
press the
STORE/LAP button to lock in
your selection. The two digits representing
seconds are zeroes.
11. At this point the
AM/PM indicator will start
flashing again, and the seconds start running
from double zero. You can start over at step 2
to repeat the time setting procedure or move to
setting the alarm by pressing the
SET/
START/STOP button.
14 15
