Bedienungsanleitung Polar RCX 3 (Seite 38 von 57) (Englisch)

520075

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

11. USING A NEW ACCESSORY

Before taking a new accessory into use, it has to be introduced to the training computer. This is called

pairing and only takes a few seconds. Pairing ensures that your training computer receives signals from

your accessory only, and enables disturbance-free training in a group.

Before entering an event or race, make sure that you do the pairing at home. This is to prevent

interference due to the long-range data transmission. When pairing new sensor make sure you are not near

(40 m/131 ft) other similar sensors.

Pairing a New Speed Sensor with the Training Computer

Make sure the speed sensor has been correctly installed. For more information on installing the speed

sensor refer to the user manual of the speed sensor or for video tutorial at

http://www.polar.com/en/polar_community/videos.

You can have two bikes on the training computer. Each bike has to have the sensors separately taught.

You can only teach one speed sensor to one bike. If you have two bikes, both of them can use the same

speed sensor. Or, they can have their own set of sensors. When you pair a new sensor to a bike that

already has a previously taught sensor in the memory, the new sensor replaces the previous one.

1. Go to MENU > Settings > Sport profiles > Cycling (Bike 1) > Bike 1 settings > Speed sensor > Search

new and press OK.

2. Press OK to start test drive is displayed.

3. Press OK and Searching for new speed sensor is displayed. The training computer starts searching for

the speed sensor signal. Rotate the wheel a few times to activate the sensor. The flashing red light on the

sensor indicates that the sensor is activated.

4. Once the new speed sensor is identified, Speed sensor found is displayed. Pairing is complete.

5. If the search is not successful, Speed sensor not found or Other speed sensors interfering. Move

further., Try again? YES / NO is displayed.

6. Select YES to start the search again.

7. Select NO to cancel the searching.

8. To return to time mode, press and hold the BACK button.

Pairing a New Cadence Sensor with the Training Computer

Make sure the cadence sensor has been correctly installed. For more information on installing the cadence

sensor refer to the user manual of the cadence sensor or to the video tutorial at

http://www.polar.com/en/polar_community/videos.

You can have two bikes on the training computer. Each bike has to have the sensors separately taught.

You can only teach one cadence sensor to one bike. If you have two bikes, both of them can use the same

cadence sensor. Or, they can have their own set of sensors. When you pair a new sensor to a bike that

already has a previously taught sensor in the memory, the new sensor replaces the previous one.

1. Go to MENU > Settings > Sport profiles > Cycling Bike 1 > Bike 1 settings > Cadence sensor > Search

new and press OK.

2. Press OK to start test drive is displayed.

3. Press OK and Searching new cadence sensor is displayed. The training computer starts searching for

the cadence sensor signal. Rotate the wheel a few times to activate the sensor. The flashing red light on

the sensor indicates that the sensor is activated.

4. Once the new cadence sensor is identified, Cadence sensor found is displayed. Pairing is complete.

5. If the search is not successful, Cadence sensor not found or Other cadence sensors interfering. Move

further., Try again? YES / NO is displayed.

6. Select YES to start the search again.

7. Select NO to cancel the searching.

8. To return to time mode, press and hold the BACK button.

ENGLISH

38 Using a New Accessory

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polar RCX 3 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polar RCX 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info