Bedienungsanleitung Polar S610 (Seite 41 von 51) (Englisch)

460176

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

...there is no heart rate reading (- -)?

1. Check that the electrodes of the transmitter are moistened and that you

are wearing it as instructed.

2. Check that you have kept the transmitter clean.

3. Check that you are not near other people that have heart rate monitors,

high voltage power lines, televisions, mobile phones or other sources of

electromagnetic disturbance.

4. Have you had a cardiac event which may have altered your ECG

waveform? In this case consult your physician.

...the code search was not successful?

The frame around the heart symbol will disappear. Bring the receiver up to

your chest near the transmitter’s Polar logo. The receiver starts looking for a

heart rate signal again. If you still do not succeed in code searching, but

your heart rate is displayed and the heart symbol without a frame is

flashing, you can start exercising but your wrist receiver may become

disturbed by other heart rate monitors.

...heart symbol flashes irregularly?

1. Check that the wrist receiver is not further than 1 metre/ 3 feet from

the transmitter.

2. Check that the elastic strap has not become loose during exercise.

3. Make sure that the electrodes of the transmitter are moistened.

4. Make sure that there is no other heart rate transmitter within 1 metre/ 3 feet.

5. Cardiac arrhythmia may cause irregular readings. In this case consult

your physician.

...other person with heart rate monitor is causing interference?

Your training partner may have exactly the same code as you. In this case

proceed as follows: Keep a distance from your training partner and

continue your training session normally.

1. Take the transmitter off your chest for 30 seconds. Keep a distance from

your training partner.

2. Put the transmitter back and bring the receiver up to your chest near

the transmitter’s Polar logo. The receiver starts looking for a heart rate

signal again. Continue your training session normally.

...heart rate reading becomes erratic or extremely high?

You may have come within range of strong electromagnetic signals which

cause erratic readings. Check your surroundings and move further away

from the source of disturbance.

...the display is blank or fading?

If the display is blank, activate the wrist receiver by pressing the OK button

twice, after which the Time of day display appears. The first sign of a

discharged battery is the battery symbol on the display. Also the digits fade

when the backlight is used. Have the batteries checked.

...there are no reactions to any buttons?

Reset the Polar heart rate monitor. Resetting clears watch settings which

will return to the default settings. User information and measurement

options settings will be saved.

I 78 I 79

S610 manual/GBR B.pm6 18.12.2000, 15:5378-79

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polar S610 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polar S610

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info