542821
13
Zoom out
Zoom in
Vorherige Seite
1/29
Nächste Seite
23
22
Functions during
Heart Rate
Measurement
MEASURE
STOPW TIME IN TZ KCAL
SEE YOUR HEART RATE
You can see your heart rate in beats per minute. A flashing
heart symbol indicates an ongoing heart rate measurement.
The inner heart symbol flashes at the pace of your heart. The
outline indicates that the heart rate reception is coded.
ILLUMINATE THE DISPLAY
Press SIGNAL/LIGHT.
Backlight is activated for a few seconds.
TURN THE TARGET ZONE SOUND SIGNAL ON/OFF
When the Target Zone sound symbol appears in the display,
you will hear an alarm sound with each heart beat if you go
above the Upper Limit or below the Lower Limit of your Target
Zone. Press and hold SIGNAL/LIGHT for 2 seconds to turn the
Target Zone sound signal on and off.
Target Zone sound signal is on
A flashing heart rate reading also informs you of being
outside your Target Zone.
The method used in defining the exercising Target Zone is
indicated after the two beeps as follows:
1. O.Z.V (OwnZone Variability) and the currently
determined OwnZone limits appear on the
illuminated display.
2. O.Z.L (OwnZone Latest) and your previously
determined OwnZone limits appear on the
illuminated display.
3. O.Z.A (OwnZone Age) and your age-predicted
heart rate limits appear on the illuminated display.
HOW TO USE PREVIOUSLY DETERMINED
OWNZONE
Every time you start the stopwatch and have the OwnZone
option on, Polar SmartEdge starts finding your OwnZone. It is
recommended to determine your OwnZone for every exercise
session separately. At least it should always be performed
when changing exercise environment, exercise mode or if
you have abnormal feelings about your physiological state
when starting the exercise.
However, you can choose to exercise with the latest OwnZone
limits in case you are not willing to start the process of
redefining your OwnZone.
1. Start the heart rate measurement and stopwatch as usual.
appears on the display.
2. Press SET/START/STOP. Polar SmartEdge starts using your
latest determined OwnZone.
O.Z.L and the values for your previously determined
OwnZone appear momentarily on the illuminated
display.
In case there is no previously determined OwnZone in memory,
Polar SmartEdge starts using your age predicted exercising
limits.
O.Z.A and your age-predicted heart rate limits appear
on the illuminated display.
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Polar SmartEdge wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info