Bedienungsanleitung Polaroid Impossible i-1 (Seite 11 von 88) (Englisch)

694111

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

16 | English

enough for you to shoot 15 packs

of ﬁ lm at once, or for three days

of use on and off. You can check

how much battery life you have by

counting how many LEDs in the

ring ﬂ ash blink when you turn the

camera off and on again.

When the I-1 battery is low (3 or

fewer ring ﬂ ash LEDs light up),

then the red LED power indicator

will slowly blink on and off and

the ﬂ ash will no longer work. When

the battery is critically low, the

blinking becomes more rapid and

the camera will cease operation.

UPDATING CAMERA SOFTWARE

The I-1 box includes a USB data

cable

. This is a dedicated cable

for data transfer between the cam-

era and a computer. Please only

use it if for updating the software

of your I-1.

ATTACH THE CAMERA HAND STRAP

The I-1 comes with a removable

hand strap

. To attach it to the

camera, ﬁ rst locate the two circular

strap mounts

on the sides of

the camera towards the back.

When you get your camera, it will

come with two screws

in the

accessories compartment. Position

the screws at either end of the

strap over the mount holes. Twist

the screws in until they can go no

further and are holding the strap

ﬁ rmly in place.

USING A TRIPOD

The I-1 has a tripod socket in its

base, which works with most stan-

dard tripods. Simply screw your

tripod mount onto the I-1.

Note: with most tripods, the tripod

mount will need to be unscrewed

before you can load or exchange ﬁ lm

into the I-1

English | 17

THE I-1 APP

THE I-1 APP FOR iOS & ANDROID

The I-1 works as a standalone point

and shoot camera, but you can also

unlock more features through the

I-1 App for Apple iOS (8 and up)

and Google Android (4.3 and up).

To check whether your Apple or

Android device is compatible with

the I-1, visit this link:

support.the-impossible-project.com

DOWNLOADING THE I-1 APP AND

CONNECTING IT WITH YOUR CAMERA

Download the I-1 App to your

device. Search for ‘Impossible I-1’

in the Apple App Store or Google

Play Store. To connect the camera

to the App, put the camera in

App Mode by turning the control

knob

counterclockwise until

the Bluetooth symbol is at the

front. A blue indicating LED within

the camera’s ring ﬂ ash will blink

slowly as it searches for a device

to pair with. Make sure Bluetooth

is enabled on your smartphone

or iPod touch, then open up the

App. You’ll know the devices are

paired when the App screen reads

‘Connection Successful’ and the

blue LED stops blinking.

If you are having trouble connect-

ing the camera to the App, then try

resetting the camera by pressing

the reset button. You can ﬁ nd the

reset button inside the ﬁ lm door

– it’s a small black dot on the top

left-hand side, above where the

ﬁ lm pack is inserted. To push the

reset button, carefully apply gentle

pressure with a narrow pointed

object like a pencil or a toothpick.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polaroid Impossible i-1 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info