Bedienungsanleitung Polaroid Impossible Instant Lab Universal (Seite 8 von 10) (Englisch)

694110

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

STARTING THE EXPOSURE

FINISH THE EXPOSURE

EJECTING THE PHOTO AND

HANDLING IT CORRECTLY

AFTER USE

Roller System

When ready, place your device on the

Universal Cradle with screen face-

down and the ﬂash facing up towards

you. The top of your device should

point in the same direction as the

direction your photo leaves the Instant

Lab Universal. Once on the cradle,

you will hear a sound to indicate a

successful connection, or one that

indicates a failure. Some devices

will also use the ﬂash to indicate the

successful connection. When you hear

the ‘success’ sound and you see the

ﬂash, pull the shutter slide

all the

way out. Do this within 5 seconds of

hearing the success sound.

Note iPod and most Android devices will

sound an alert instead of the ﬂash.

When you hear the shutter camera

sound (in some devices, the device’s

ﬂash will also go off), push the shutter

slide

back in. Once the shutter

slide is back in, you can safely remove

your device off the cradle.

Press and hold the eject button

to eject your instant photo. With older

generations of Impossible ﬁlm (for

example: early editions like Silver

Shade and Generation 1.0), you will

need to shield your photo from light

during development.

For Generation 2.0 ‘no shield’ ﬁlm, you

can watch your photo develop without

shielding the image. See individual

ﬁlm packaging for details.

Remove your device and replace the

cradle cover

to protect the lens.

Press tabs

on either side of each

tower section to collapse the tower.

Cleaning the Instant Lab Universal

Always unplug the Instant Lab

Universal from the power adaptor

before cleaning.

Exterior

Wipe gently with a soft cloth. If the

Instant Lab Universal is very dirty, soak

the cloth in mild soapy water and wring

well before use. Wipe the Instant Lab

Universal with a damp cloth and then

dry with a dry, clean cloth.

When cleaning the

rollers, use a moist cotton swab or

cloth. Do not use a paper tissue as this

could get stuck between the rollers.

Using a small amount of either warm

water or alcohol, press the swab gently

onto the rollers and press the eject

button, which will turn the rollers. Do

not turn the rollers forcibly by hand!

Repeat several times until clean. Do

not use an excess amount of water

or alcohol as ﬂuid may drip onto the

electronics and damage them.

Lens Dust can be removed with a

blower brush. Fingerprints can be

removed by breathing on the lens and

then wiping it with a lens cloth or

tissue. Persistent dirt can be removed

by applying a small amount of lens

cleaning ﬂuid to the cloth.

Note Mold may form on the lens surface if

the lens is left dirty.

Charger Wipe gently with a soft, dry

cloth.

Note Do not use strong solvents such as

benzene or alcohol or a chemically treated

cloth on parts other than the metal rollers.

Storing the Instant Lab

Do not leave the Instant Lab

Universal in an environment with high

temperatures (40°C / 104°F or more)

or low temperatures (-10°C / 14°F or

less.) Failure to do so may impact the

battery life.

Do not use the Instant Lab Universal

in the rain or allow water to enter the

device. Do not pour water over the

Instant Lab Universal.

When storing the Instant Lab Universal

for extended periods, keep it in a

cool, dry place that is well ventilated.

The battery will lose its power within

a period of several months. It is

recommended that you recharge the

battery every 3 – 5 months to extend

the battery life.

Note Do not store the Instant Lab Universal

in direct sunlight, in hot vehicles or near

heat sources. Avoid leaving the device

in places where chemical products are

handled as this may result in corrosion.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polaroid Impossible Instant Lab Universal Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info