Bedienungsanleitung Polaroid Macro 5 SLR (Seite 9 von 14) (Englisch)

472707

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Date display module

The date display module (21) allows you

to print the date or the day/time on pic-

tures (22).

Setting the date

1 Press MOD (mode) repeatedly until the

desired date sequence is displayed:

No printing

Month/day/year

Day/month/year

Year/month/day

Day/time (24-hour clock)

Note: An

M in the display indicates which

digit is the month.

2 Press

SEL (select) to select the year,

month or day (see blinking digit).

3 Press

SET repeatedly (or hold button)

until the desired digit is displayed. Repeat

steps 2 and 3 until the desired year,

month and day are all set.

4 Press

SEL again to lock in the date.

Setting the time

1 Press MOD until the day/time mode is

displayed. The first set of digits in the dis-

play is the day of the month, followed by

the time in hours and minutes.

2 Press

SEL and the hours will blink. Press

SET to toggle through the hours. Press SEL

again to lock in the hour. The minutes will

now blink.

3 Press

SET to toggle through the minutes.

Press

SEL again to lock in the minutes.

4 Press

SEL again to lock in the time.

Shutting off the date display option

Press MOD until a series of dashes ap-

pears in the display.

Note: The date module is powered by the

battery in the film pack, or by the batter-

ies in the handgrip. If there are no batter-

ies or film in the camera for more than 5

minutes, you will need to reset the date/

time after replacing the batteries.

Flash control (23)

The two built-in electronic flash units are

designed to provide even illumination at

all reproduction scales. You can turn off

either flash unit if side lighting is needed

to show texture or elevation. The light

output from the remaining flash unit will

be increased to produce the correct

exposure.

Press the flash control once to turn off

the right flash; press it a second time to

turn off the left flash; press it a third time

to turn off both flash units.

Lighting techniques

Both built-in flash units can be turned off,

and auxiliary lighting used. The auxiliary

light is connected to the PC socket on the

back of the camera (24). Advanced photo-

graphers may find it useful to experiment

with different lighting arrangements.

• The auxiliary lighting must be electronic

flash — do not use tungsten, halogen or

fluorescent lights.

• The built-in flash can be combined with

auxiliary lighting.

• Test exposures may be required to deter-

mine the correct location and settings for

the auxiliary flash unit for correct expo-

sure.

Outdoor use

The camera is designed primarily for

indoor use; if it

must

be used outdoors:

• Select an area that is not subjected to

bright sunlight, which may cause over-

exposed pictures.

• Shade the subject from direct sunlight. (It

is difficult to see the ranging lights in very

bright light.)

• Use the built-in flash units to ensure con-

sistent exposure.

English 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polaroid Macro 5 SLR Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info