Bedienungsanleitung Polaroid One Step 2 (Seite 7 von 69) (Deutsch, Englisch, Französisch, Italienisch)

693413

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

User Manual 14

User Manual15

How to use

the OneStep

Charge the camera

Important The OneStep 2

will not be fully charged upon

purchase — it should be fully

chargedbeforeﬁrstuse.To

charge the camera, plug the

USB charging cable into the Mi-

cro-USB slot on the camera’s

back panel, and the other end

of the cable into a charger,

such as a smartphone adapter

or your computer’s USB slot.

TheredashchargeLED will

turn off when the battery is

fully charged.

A full charge usually takes

about 2 hours through a wall

socket with a smartphone

adapter, or up to 4 hours

through a computer’s USB

slot. A fully-charged OneStep 2

camera will have enough pow-

er to shoot 15-20 packs of

ﬁlm,dependingonusage.

Remember to turn your camera

off after every use to conserve

battery life.

Box contents

01 OneStep 2 Camera

02 USB Charging Cable

03 User Manual

04 Camera Neck Strap

1. Turn the

camera on/off

To turn the camera on,

slide the power switch into the

ONposition(down).Theash

charging LED on the back panel

will start blinking to charge

theash,andtheremaining

ﬁlmcounteronthetopofthe

camera will light up to indicate

that the camera is switched on.

To turn the camera off again,

return the power switch to the

OFF position.

2. Load the lm

Slidetheﬁlmdoorlatch

toopentheﬁlmdoor.Push

theﬁlmcassettealltheway

in,withtheﬁlm’sdarkslide

facing up.

Note Please check indi-

vidualﬁlmpackagingfor

development time, handling

and storage details.

3. Close lm door

Whenyouclosetheﬁlmdoor,

the darkslide will eject from

the camera automatically,

underneaththeﬁlmshield.

Theplasticﬁlmshieldis

designed to protect images

from light as they develop — it

should not be removed. Take

the darkslide out from under

theﬁlmshieldandletthe

ﬁlmshieldrollbackup.Ifthe

darkslide has not ejected,

removetheﬁlmpackand

re-insert it, making sure it is

pushed all the way to the back

of the camera.

4. Set the Flash

& Lighten/Darken

Flash Thecameraashwill

trigger by default when you

shoot with the OneStep 2. To

shootwithouttheash,press

andholdtheashoverridebut-

ton on the back panel as you

press the shutter button.

Warning Shooting without

ashwillreducecamera

performance and picture

qualityinmostlightingsit-

uations except brightly-lit,

sunny environments. We

recommend always shoot-

ingwithash.

Lighten/Darken Use the light-

en/darken switch on the right

side of the lens barrel to adjust

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polaroid One Step 2 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info