772287

Polisport Guppy mini Seite 7

7
Zoom out
Zoom in
Vorherige Seite
1/71
Nächste Seite
| 4 | www.polisport.com
1. Turn the child seat upside down as shown in the image. Cut the plastic
straps that hold the mounting block (H).
2. Remove the metallic bracket (G) from the seat by cutting the straps.
Disengage and remove the metallic bracket (G) from the child seat, pulling
it upwards.
3. Use the Allen key No. (H9) to loosen and remove the metal mounting
plate (F1).
4. Hold the metallic bracket (G) the same as in the picture and pass it
through the opening in the child bicycle seat.
5. In order to adjust the front baby seat according to the bicycle size, set
the metallic bracket (G) into one of the two allowed positions to move
the seat backward or forward. At the beginning we suggest to place it on
the position No 1.
6. Insert the metallic mounting plate (F1) on the grooves of the front baby
seat, and close it as indicated in the picture.
7. Place the washer (F3) on the screw (F2). Then tighten securely with the
key (H9). Tighten tightly so that the metal bracket (G) is securely fastened.
This step is extremely important for the safety of the child.
8. Remove the screws (H5) on the mounting block (H), with the Allen key
no. 6 (H9).
9. Please check if you can install the mounting kit option H.A. In order to
use this set you need at least 35 mm height available on the the headtube
frame. If you don´t have this length available, please choose option H.B.
Option H.A.: To install the mounting block (H), option H.A, position the
mounting block (H1) facing the front of the bicycle frame headtube. Make
sure that the black plastic part of the mounting block (H1) is facing the
top. Using the screws (H5), secure the metallic mounting plate (H4) and
the plastic connector (H3) to the mounting block (H1).
By using the combination H.A with the screws (H5) you will be able to
place the mounting block (H) in frame headtubes ranging from ø 22 to
34 mm.
If your frame head tube is wider, please use the screw H8 (supplied in the
plastic bag ), and you will be able to place the mounting block (H) in frame
headtubes ranging from ø 28 to 40 mm.
It´s very important that the screw is long enough to allow the correct
tightening of the mounting Block (H).
Option H.B.: In case the bicycle frame does not have enough space to
apply the mounting Kit (H.A), use the additional kit (H.B) supplied in the
plastic bag. By using the combination H.B with the screws (H8) you will be
able to place the mounting block (H) in frame headtubes ranging from
ø 28 to 40 mm.
Position the mounting block (H1) facing the front of the bicycle frame
headtube. Make sure that the black plastic part of the mounting block
(H1) is facing the top.
Using the screws (H8), secure the metallic mounting plate (H7) and the
plastic connector (H6) to the mounting block.
H.A./B.A.: Next, make sure that the mounting block (H) is centered
regarding the headtube, and strong hand tighten the screws, applying the
same force in both of them. Make sure the mounting block (H) is firmly
fixed to the frame head tube. This step is extremely important for the
child’s and cyclist safety.
10. Insert the ends of the metallic bracket (G) into the holes of the
mounting block (H1) until you hear a click (1) from both sides. This sound
indicates it is in the locked position. Make sure that the ends of the
metallic bracket (G) will pass through the mounting block (H) as shown
in the picture (2). After properly installing the baby-seat please make sure
that the mounting block (H) and the seat (A) are properly centered. Make
sure that the screws are properly handed tighten and that the mounting
block (H) is securely fixed. Try to move or rotate the baby-seat in order to
check if the mounting block (H) is firmly attached. If it´s properly attached
it will not move. This step is extremely important for the children and
cyclist safety.
11. To place the child in the seat, first fully extend the belt straps (B),
sliding the adjusters (B2). This makes it easier to put the child in the seat.
To put the child in the seat, open the lock (B1) of the safety belt (B) and
press the three buttons of the lock (B1) as indicated.
• This front baby seat must not be mounted to bicycles fitted with rear
shock absorbers.
• This front baby seat must not be mounted to a racing bicycle with drop
handlebar.
• This front baby seat must not be mounted to Motorized Vehicles such as
Mopeds and Scooters.
• This front baby seat must not be mounted in bicycles with triangular,
square or carbon fiber frames.
• This front baby seat must be assembled on bicycles with round and oval
frame head tube with diameters ranging from Ø22 to Ø40 mm.
• The front baby seat must be assembled on bicycles with wheels with
diameters of 26” and 28”.
• This front baby seat is only suitable for carrying children with a maximum
weight of 15 Kg (and children with recommended ages ranging from 9
months to 3 years of age - with the weight as the decisive variable).
• The total weight of the cyclist and the child transported must not exceed
the maximum permitted load permitted for the bicycle. Information on
the maximum load can be found in the operating instructions of the
bicycle. You can also contact the manufacturer for this question.
• The seat may only be mounted on a bicycle suitable for the attachment
of such additional loads.
• The position of the front baby seat must be adjusted so that the bicycle
rider does not touch the front baby seat with the feet when in motion.
• It’s very important to adjust correctly the seat and its component parts
for optimum comfort and safety of the child. It’s also important that the
seat does not slope forward so that the child does not tend to slide out of
it. It’s also important that the backrest slope backward slightly.
• Check if all parts of the bicycle function correctly with the front baby
seat mounted.
• Check the instructions of the bicycle, and If you have any doubts on
fitting the front baby seat to your bicycle, please contact your bicycle
supplier for further information.
ASSEMBLY INSTRUCTIONS
TECHNICAL FEATURES
A. Main seat
B. Safety belt
B1. Safety lock
B2. Belt adjuster
B3. Central belt adjuster
B4. Hole for belt adjustment
C. Cushion
D. Footrest strap
E. Footrest
F. Metallic mounting Kit
F1. Metallic mounting plate
F2. M8x16 screw
F3. M8 washer
F4. M8 nut
G. Metallic bracket
H (H.A/H.B) Mounting block
H1. Plastic mounting block
H2. Release button
H3. Plastic Conector
H4. Metallic mounting plate
H5. Screw M8x35
H6. Frame plastic mounting
H7. Metallic mounting plate
H8. Screw M8x50
H9. Allen Key nr. 6
I. Batch serial number
TABLE OF CONTENTS OF PRODUCT
For child safety and for your peace of mind, Polisport has developed the
perfect child carrying solution that’s suitable for a wide range of adult
bicycles.
Our ergonomic child seats are all built with safety and comfort as the
primary goals.
In this manual, you will find information on attaching the front baby seat
to the frame head tube of your bicycle.
Carefully read the manual for a safe and correct installation of the front
baby seat.
FRONT BABY SEAT FOR BICYCLE
FRONT HEAD TUBE MOUNTING SYSTEM
EN
… 7 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Polisport Guppy mini wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info