Bedienungsanleitung Polti Cimex Eradicator (Seite 12 von 18) (Englisch)

648603

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

WHICH WATER TO USE IN THE

BOILER

This appliance has been designed to function

with normal medium tap water between 8°f

and 20°f. If the tap water contains a lot of li-

mescale use a mix composed of 50% tap wa-

ter and 50% demineralised water which is wi-

dely available to purchase. Do not use pure

demineralised water.

Warning: check the hardness of the water at

the technical office at your local council or

the local water supplier.

If you only use tap water, you can reduce the

formation of limescale by using the special

Kalstop limescale product, distributed by Pol-

ti, and available for sale at all major domestic-

appliance stores or online at www.polti.com.

Never use distilled water, rain water or water

containing additives (e.g. starch, perfumes),

or water produced by other domestic ap-

pliances, by water softeners or filter jugs.

Do not use chemical substances or detergents.

USE

Cimex Eradicator is a steam generator equip-

ped with Steam Disinfector (Polti worldwide

patent), a gun capable of dispensing steam

heated to 180°C. Cimex Eradicator is a natural

and effective method for eliminating the pro-

blem of bed bugs. Laboratory tests and field

trials have shown that Cimex Eradicator treat-

ment with dry saturated steam heated to

180°C is able to eliminate 100% of eggs and

larvae and more than 90% of adult insects

with the first pass.

The steam dispenser, Steam Disinfector, is

equipped with a controlled-expansion heat

exchange device, Polti world patent, which

further heats the steam generated by the boi-

ler to the temperatures reported above. In this

way, eggs, larvae and insects die in a few se-

conds from heat shock.

To eliminate 100% of adult insects and get ad-

vice on how to find and remove the bugs,

please follow the instructions listed in the

Quick Guide to Disinfestation and on the DVD

that you will find in the package.

The HPMED sanitiser, mixed with the steam at

the time it is dispensed, removes the bad

smells generated by the bed bugs. HPMED is

a water-alcohol solution that can be dispen-

sed when people are present.

1. PREPARING FOR USE

1.1 Remove the appliance from the packaging,

checking that the product is whole and that

all the parts are there.

1.2 Attach the pivoting wheels to the base of

the appliance applying pressure (1).

1.3 Unscrew the safety cap (2) and fill the boi-

ler with 2l of water (3)(if completely empty).

Carefully screw the safety cap back on (2),

checking that it is fully tightened.

This operation must always be carried out

when the boiler has cooled and with the

power cable disconnected from the mains.

1.4 Open the door of the built-in socket and

insert the Steam Disinfector built-in plug of

the steam hose (4), pressing the specific but-

ton and making sure that the hooking pin is

inserted perfectly in the specific locking hole

on the socket.

1.5 Unscrew the cap of the HPMed detergent

(5).

1.6 Insert the stopper into the bottle (6) until it

rests on the base of the bottle, ensuring that it

stays as straight as possible (7).

1.7 Screw the bottle into the dispensing gun

fitting taking care to ensure that the stopper

enters the hole inside the fitting perfectly,

without bending (8).

1.8 Connect the cable plug to an earthed

power supply of the correct voltage(9).

Completely unwind the power cable before

plugging it into the mains and before use, and

always use the appliance with the power ca-

ble completely unwound.

1.9 Press the boiler switch ( ) and the accesso-

ries switch ( ) (10), which will light up to-

gether with the “steam ready” indicator light

( ) and the indicator light on the Steam Disin-

fector.

1.10 Wait for the “steam ready” indicator light

( ) and the steam dispenser light to turn off.

The indicator light (16) signals that there is

pressure in the boiler. The appliance is ready for

use.

WARNING: Do not screw the bottle to the

gun without the stopper. If no consumption

of HPMED is seen during use of the product,

this means that the stopper has not been in-

serted correctly, or has folded within the

bottle. Unscrew the bottle and repeat the in-

sertion procedure, taking care to position it

correctly.

ENGLISH

| 26 |

PRELIMINARE VT CIMEX ERADICATOR - M0S11386 - 1Q03:FEV 1000-950.qxd 04/03/2016 15.03 Pagina 26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Cimex Eradicator Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti Cimex Eradicator

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info