648805

Polti Sani System Express Seite 7

7
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
clean before sanitising it. In the event of visi-
ble dirt, clean the surface before sanitising it.
Direct the steam downwards for 2 seconds in
order to bring all the components of the ma-
chine to their correct temperature, in order to
avoid condensation. Bring the delivery nozzle
into a position perpendicular to the surface to be
sanitised and keep it at a distance of 10 cm, as
provided by the spacer, avoiding direct contact
of the latter with the surface. Deliver the steam
on a continuous movement, using “brushing”
movements to cover the surface to be sanitised.
Repeated treatments will lead to more efficient
sanitising of the treated surfaces.
SANI SYSTEM POLTI delivers saturated dry
steam that, added to HPMED, will usually dry
without leaving residues within 30 seconds to 1
minute, depending on the environmental condi-
tions.
To sanitise piping, drains, etc., connect the deliv-
ery nozzle to the adaptor (R), to obtain a con-
centrated output jet of steam. Before starting to
use the device, make sure that the material to
be treated can withstand the high temperature.
C
C
O
O
N
N
N
N
E
E
C
C
T
T
I
I
O
O
N
N
O
O
F
F
A
A
C
C
C
C
E
E
S
S
S
S
O
O
R
R
I
I
E
E
S
S
The following accessories can be connected to
the delivery nozzle:
Adaptor for creating concentrated steam jet
(R): This accessory provides a concentrated
output jet of steam. To fit this accessory match
up the teeth on the adaptor with the openings on
the tip of the nozzle. Place the accessories
against the nozzle, pushing it as far as it will go,
then turn it in a clockwise direction (fig.4).
Spacer (S): The spacer is used to keep at the
correct distance from the surface to be treated in
order to sanitise it correctly.
To fit the spacer, insert the tip of the delivery
nozzle into the ring of the spacer, first on the
side opposite to the fixing ring, then match the
ring of the spacer with the tip of the nozzle and
fix them together by turning the fixing ring (fig.5).
S
S
H
H
O
O
R
R
T
T
A
A
G
G
E
E
O
O
F
F
W
W
A
A
T
T
E
E
R
R
When the water in the tank runs out, the lamp
(D) will light up and a buzzer will sound. To re-
sume use, fill the tank again as described under
the heading “Preparation for use”.
S
S
H
H
O
O
R
R
T
T
A
A
G
G
E
E
O
O
F
F
W
W
A
A
T
T
E
E
R
R
I
I
N
N
T
T
H
H
E
E
B
B
O
O
I
I
L
L
E
E
R
R
There may be a shortage of water in the boiler if
the tank has not been filled after the appliance
has warned of a lack of water in the tank.This
means that there is no more water either in the
tank or in the boiler.In this case, the water out in-
dicator light (D) will flash.
If, however, there is water in the tank but the
same warning is present (light (D) flashing), then
there may be a problem with the automatic wa-
ter supply system.Turn off the appliance and dis-
connect from the power source. Wait for a few
minutes and restart the appliance. If the problem
persists contact the service centre.
T
T
R
R
A
A
N
N
S
S
P
P
O
O
R
R
T
T
The POLTI SANI SYSTEM can conveniently be
moved using the carry handle (F) provided.
WARNING: never drag the device by the nozzle.
To move it, use the handle (F) only.
S
S
T
T
O
O
R
R
I
I
N
N
G
G
T
T
H
H
E
E
D
D
E
E
V
V
I
I
C
C
E
E
When you have finished using the device, put it
away in a clean and dry place after disconnect-
ing it from the power mains. Keep it away from
sources of heat and protect from the weather.
Do not expose the device to extreme tempera-
tures.
M
M
A
A
I
I
N
N
T
T
E
E
N
N
A
A
N
N
C
C
E
E
Before carrying out any maintenance on the
device, always unplug it from the power
mains and allow it to cool down before pro-
ceeding.
If the monotube is torn, it must be replaced by
an authorised service centre.
Cleaning of the delivery nozzle
Clean the delivery nozzle every 10-15 hours of
use.
Clean the delivery nozzle using the brush (T) in-
cluded in the supply, sliding it inside the tube so
as to remove any residues of scaling in it (fig.6).
E
E
N
N
G
G
L
L
I
I
S
S
H
H
SANI SYSTEM EXPRESS
30
SANI SYSTEM EXPRESS M0S09441 1Q10_MODIFICATO_7:A5 19/05/2011 11.03 Pagina 30
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Polti Sani System Express wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info