Bedienungsanleitung Polti Sani System Polti Check (Seite 9 von 13) (Englisch)

648795

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

The device will then return to its initial confi-

guration and require a LOGIN.

To LOG IN again, you must remove the

CARD from the slot and to insert a card

again.

To end the operations, turn off the machine by

means of the ON-OFF switch (A).

N.B.: If the CARD used to LOG IN is mi

slaid or damaged, it is possible to unlock

the machine using the “SUPER USER”

CARD (S.U.) (included in the supply).

When you insert this CARD into the slot

(D5), the LOGOUT procedure will be car-

ried out automatically and the summary of

the last work session will be printed.

• Press the steam delivery push-button (P) to

obtain the production of steam from the de-

livery device. The delivery lamp (N) will ex-

tinguish when the resistor inside the deli-

very device has reached its running

temperature.

The steam delivery push-button (P) has a

“safe position” so as to avoid accidental de-

livery of steam.

Note:

• While the device is in use, the delivery si-

gnalling lamp (N) lights up and extingui-

shes.

. This indicates that the resistors are starting

to work in order to keep the pressure in the

boiler and the temperature in the delivery

device steady. It is therefore possible to

continue sanitising regularly, as this occur-

rence is normal.

• BEFORE STARTING TO SANITISE, IT IS

ADVISABLE TO DIRECT THE FIRST JET

OF STEAM ONTO A CLOTH OR

DOWNWARDS FOR APPROXIMATELY

30 SECONDS WITHOUT HOOKING UP

THE FITTING FOR THE DISPOSABLE

BOTTLE (Q). THIS WILL ENABLE THE

OPTIMUM TEMPERATURE AND PRES-

SURE TO BE REACHED.

Before treating delicate or special surfaces

with the SANI SYSTEM POLTI sanitising sy-

stem, consult the manufacturer’s instructions

and carry out a test on a hidden part of the

surface or on a sample of the material.

Allow the sanitised part to dry to make sure

that no changes in colour or deformations

have occurred.

Make sure that the surface to be treated is

clean before sanitising it. In the event of

visible dirt, clean the surface before saniti-

sing it.

Direct the steam downwards for 2 se

conds in order to bring all the components

of the machine to their correct tempera-

ture, in order to avoid condensation.

Bring the delivery nozzle into a position per-

pendicular to the surface to be sanitised and

keep it at a distance of 10 cm, as provided by

the spacer, avoiding direct contact of the lat-

ter with the surface. Deliver the steam on a

continuous movement, using “brushing” mo-

vements to cover the surface to be sanitised.

Repeated treatments will lead to more efficient

sanitising of the treated surfaces.

SANI SYSTEM POLTI delivers saturated

steam that, added to HPMED, will dry without

leaving residues within 30 seconds to 1 mi-

nute, depending on the environmental condi-

tions.

To sanitise piping, drains, etc., connect the

delivery nozzle to the adaptor (R), to obtain a

concentrated output jet of steam. Before star-

ting to use the device, make sure that the ma-

terial to be treated can withstand the high

temperature.

Precision: Class 2.5

This device has a handy and accurate indica-

tor (F) for displaying the operating pressure

immediately. When the device is on stand-by,

that is to say it is switched on but no steam is

being delivered, the pressure is kept steady

at between 4 and 6 bars.

SANI SYSTEM CHECK

SANI SYSTEM CHECK M0S08111 2O08:A5 31/07/2008 11.27 Pagina 47

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Sani System Polti Check Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info