Bedienungsanleitung Polti Unico MCV20 (Seite 14 von 21) (Englisch)

648708

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

ENGLISH

| 30|

steam trigger on the handle, and the ON/vacuum button,

respectively.

3. CLEANING DELICATE FLOORS

(wooden, stone, waxed surfaces, etc.)

3.1 For suction alone, set the innovative universal brush to

position C (bristle inserts) pressing the pedal (which ensures

that the holder with cloth is not

attached to the brush).

3.2 Press the ON/vacuum button on the appliance and proceed

with vacuuming the ﬂoor.

It is possible to adjust the suction power by moving the cursor

on the handle.

3.3 For steam cleaning and suction, set the universal brush to

position A (no insert) and ensure that points 1.5 to 1.6 have been

carried out. Attach the cloth supplied to the relative holder;

place the holder with cloth on the ground and position the

brush above, applying slight pressure until a click is heard as it

locks into place. Switch on the boiler using the ON/steam

button. Wait for the steam indicator light (upper green) to turn

off before dispensing steam. Adjust the strength of the steam

by turning the adjustment knob (to switch off the boiler press the

ON/steam button again). For this type of surface use the

minimum steam level.

3.4 Deactivate the steam lock and continue with the steam

delivery pressing the steam trigger on the handle, together with

suction, pressing the ON/vacuum button. The cloth will remove

the dirt thanks to its abrasive action and will sanitise the surface.

4. CLEANING RUGS AND CARPETS

4.1 For suction alone, set the innovative universal brush to

position A (no insert), pressing the pedal.

4.2 Press the ON/vacuum button on the appliance and proceed

with vacuuming of the surface.

It is possible to adjust the suction power by moving the cursor

on the handle.

4.3 For steam cleaning and suction, set the universal brush to

position A (no insert) and ensure that points 1.5 to 1.6 have been

carried out. Switch on the boiler using the ON/steam button.

Wait for the steam indicator light (upper green) to turn off

before dispensing steam. Adjust the strength of the steam by

turning the adjustment knob (to switch off the boiler press the

ON/steam button again). For this type of surface we

recommend using the medium steam level.

4.4 Deactivate the steam lock and continue with the steam

delivery and suction, pressing the steam trigger on the handle,

and the ON/vacuum button, respectively.

Combined use of steam and suction allows the most efﬁcient

sanitising of the surface, dissolving dirt and removing grease,

germs and mites; it also brightens the colour of ﬁbres and dries

surfaces more quickly.

5. CLEANING GLASS, WINDOWS AND TILES

5.1 For steam cleaning, ensure that points 1.5 and 1.6 have been

carried out. Turn on the boiler by pressing the ON/steam

button. Wait for the steam indicator light (upper green) to turn

off before dispensing steam. Adjust the strength of the steam

by turning the adjustment knob (to switch off the boiler press the

ON/steam button again). For this type of surface we

For safety reasons, engage the steam lock on the handle

during vacuuming.

Before removing the holder with cloth from the brush, wait a

few minutes to allow the cloth to cool. Never use the holder

without a cloth.

To avoid any dirt in the dirt collector causing bad smells

(especially where liquids are vacuumed and/or steam is used),

we recommend emptying and cleaning after every use

according to the methods described in Chapter 13.

Before using the appliance on delicate surfaces, ensure that

the part in contact with the surface is free from foreign bodies

that could cause scratches.

For safety reasons, engage the steam lock on the handle

during vacuuming.

WARNING: Before cleaning leather or fabrics with steam,

consult the manufacturer’s instructions and always carry out

a test on a hidden part or on a sample of the material. Allow

the steamed part to dry to make sure that no changes in

colour or deformations have occurred.

To avoid any dirt in the dirt collector causing bad smells

(especially where liquids are vacuumed and/or steam is used),

we recommend emptying and cleaning after every use

according to the methods described in Chapter 13.

To avoid any dirt in the dirt collector causing bad smells

(especially where liquids are vacuumed and/or steam is used),

we recommend emptying and cleaning after every use

according to the methods described in Chapter 13.

WARNING: To clean glass surfaces in particularly cold seasons,

preheat the windows starting to vacuum from a distance of

about 50 cm from the surface.

WARNING: For additional safety, test steam delivery on a

hidden part, leave the steamed part to dry to ensure that no

changes in colour or deformation have occurred.

Before removing the holder with cloth from the brush, wait a

few minutes to allow the cloth to cool. Never use the holder

without a cloth.

Manuale UNICO MCV20 VERSIONE 05-09-14_vers7:UNICO 22/09/2014 15.51 Pagina 30

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Unico MCV20 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti Unico MCV20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info