Bedienungsanleitung Polti UNICO MCV50 (Seite 12 von 20) (Englisch)

649052

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

1.8 Depending on the surface to be cleaned (rugs/carpets,

wooden ﬂoors and delicate ﬂooring, or hard ﬂoors), and the

function you wish to use (vacuum, steam, solid/liquid vacuum,

vacuum and steam together, with or without cloth), choose the

position (A-B-C) of the innovative universal brush, pressing the

relative pedal marked as per the label on the appliance, shown

below and detailed in the following chapters.

If you wish to only use suction, it is possible to remove the steam

hose by unlocking the automatic buttons from the vacuum tube

and the two connectors at the ends, and it is not necessary to

ﬁll the water tank. Without the steam hose, it is impossible to

activate the steam, even with the boiler switched on.

There are two cloths supplied, one with buffers and the other

for hard-to-reach areas.

For the MCV70 model we recommend using the special

transport grip to move the appliance more easily.

The transport grip (optional for the MCV50 model) can be

purchased at all major household-appliance shops or online at

www.polti.com.

Do not use the transport grip to lift the appliance.

2. CLEANING HARD FLOORS

(tiles, ceramic surfaces, etc.)

2.1 For suction alone, set the innovative universal brush to

position C (bristle inserts) pressing the pedal (which ensures

that the holder with cloth is not

attached to the brush).

Press the suction button on the appliance and proceed with

cleaning.

It is possible to adjust the suction power by moving the cursor

on the handle.

2.2 For steam cleaning and suction, set the universal brush to

position B (rubber inserts) and ensure that the holder with cloth

is not

attached to the brush. Ensure that points 1.5 and 1.6 have

been carried out. Turn on the boiler using the ON button and

adjust the strength of the steam using the +/- buttons (to turn off

the boiler hold the OFF button for a few seconds); for this type of

surface, we recommend the maximum steam level. The steam

indicator light will start ﬂashing and continue until the correct

temperature is reached.

2.3 Deactivate the steam lock and continue with the steam

delivery and suction, pressing the steam trigger on the handle,

and the suction button, respectively.

2.4 Alternatively, select program 1, pressing the PROGRAM

button (see Chapter 5).

The combined use of steam and suction allows the most

efﬁcient sanitising of the surface, dissolving dirt, eliminating

grease, germs and mites, and above all allows drying of the

surfaces.

In this position, it is also possible to vacuum small quantities of

liquids and dry the ﬂoor.

2.5 To clean using steam alone, it is possible to use the abrasive

action of the cloths supplied, attaching it to the special holder.

Position the holder on the ﬂoor and position the universal brush

above it in position A (no insert), apply slight pressure until it

clicks, locking into place.

3. CLEANING DELICATE FLOORS

(wooden, stone, waxed surfaces, etc.)

3.1 For suction alone, set the innovative universal brush to

position C (bristle inserts) pressing the pedal (which ensures

that the holder with cloth is not

attached to the brush).

3.2 Press the suction button on the appliance and proceed with

cleaning.

It is possible to adjust the suction power by moving the cursor

on the handle.

3.3 For steam cleaning and suction, set the universal brush to

position A (no insert) and ensure that points 1.5 to 1.6 have been

carried out. Attach the cloth supplied to the relative holder;

place the holder with cloth on the ground and position the

brush above, applying slight pressure until a click is heard as it

locks into place. Turn the boiler on using the ON button and

AAA

CAA

BBC A

Only use the cloth and special holder with the brush in position A.

Before removing the holder with cloth from the brush, wait a

few minutes to allow the cloth to cool. Never use the holder

without a cloth.

For safety reasons, apply the steam lock on the handle during

vacuuming.

WARNING: When ﬁrst operating steam, there may be some

drops of water mixed with the steam due to temperature

imbalances.

Direct the ﬁrst jet of steam onto a rag.

WARNING: The level of dirt vacuumed should not exceed the

MAX indicator on the dirt collector; this indicator refers to both

solid and liquid dirt. Upon reaching the maximum level, see

Chapter 13.

To avoid any dirt in the dirt collector causing bad smells

(especially where liquids are vacuumed and/or steam is used),

we recommend emptying and cleaning after every use

according to the methods described in Chapter 13.

Before using the appliance on delicate surfaces, ensure that

the part in contact with the surface is free from foreign bodies

that could cause scratches.

For safety reasons, apply the steam lock on the handle during

vacuuming.

| 26 |

ENGLISH

Manuale UNICO MCV50-MCV70 VERSIONE 16-09-14_vers7:UNICO 22/09/2014 16.19 Pagina 26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti UNICO MCV50 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti UNICO MCV50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info