Bedienungsanleitung Polti Unico MCV80 (Seite 19 von 26) (Englisch)

648707

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

ENGLISH

| 37 |

STEAM ONLY FUNCTION

For steam cleaning only, make sure that Chapter 2 has been

performed.

It is possible to adjust the intensity of the steam by using the +/-

buttons (see Chapter 4); for this type of surface we recommend

the minimum level of steam.

Press and hold the steam trigger on the handle and direct the

jet onto a cloth.

Use the steamed cloth to clean the surface, avoiding prolonged

use on the same spot.

14. OTHER GENERAL USES

14.1 BRIGHTENING UP CURTAINS AND DRAPES

BRIGHTENING UP CURTAINS AND DRAPES

Mites and dust can be removed from curtains and drapes by

steaming the fabric directly from the handle. The steam is able

to remove odours and brighten up colours, allowing the fabric

to be washed less frequently.

For this surface, set the steam to the minimum level.

14.2 REMOVING STAINS FROM CARPETS AND UPHOLSTERY

Connect the concentrator accessory without the bristly round brush;

direct the steam directly onto the stain with the greatest angle

possible (never vertically to the surface to be cleaned) and place a

cloth beyond the stain to collect the dirt that has been “blown” away

by the steam pressure.

For this surface, set the steam to the minimum level.

Connect the suction nozzle to the concentrator accessory and

activate the suction function to vacuum the removed dirt remained

on the floor.

14.3 TAKING CARE OF PLANTS AND HUMIDIFYING ROOMS

To care for your house plants, remove the dust from the leaves

by steaming them directly from the handle. Adjust the steam

to the minimum level and vacuum at a distance of 50 cm. Plants

breathe better and will be cleaner and brighter. Furthermore,

you can also use the steam to refresh spaces, especially those

frequented by smokers.

15. OUT OF WATER

When the tank is out of water, the indicator light on the control

panel (tap symbol) will turn on and you will hear a beep. To

continue with steam cleaning, simply open the tank door and

add water (10).

16. GENERAL MAINTENANCE

Ensure that the appliance is switched off and disconnected from

the mains (24).

To clean the outside of the appliance, only use a damp cloth

and tap water.

All accessories can be cleaned using running water, ensuring

they are completely dry before the next use.

Do not use detergents of any type.

The cloths provided can be washed by following the

instructions included on the label.

17. CLEANING THE DIRT COLLECTOR

(ordinary maintenance)

17.1 Ensure that the appliance is switched off and disconnected

from the mains (24).

17.2 Disconnect the dirt collector and remove it (25).

17.3 Hold the upper handle and turn clockwise (26).

17.4 Slowly remove the filter unit, pulling upwards and empty

the collector into an appropriate container (26-27).

17.5 Wash the collector and the filter unit using running water only

(26-27). Shake to remove excess water. This operation is

recommended in particular if liquids are vacuumed and/or the

appliance has been used in combined steam / vacuum mode

to dry the surfaces.

17.6 Reassemble all the parts following the procedure in reverse

order (30). The UNICO filter unit does not need to be dried; it

is ready for use immediately, avoiding unnecessary waiting time.

However, before replacing, we advise quickly drying the filter

and the collector with a cloth to avoid unpleasant odours

forming.

Empty the dirt collector each time the MAX level is reached and

after every use.

We recommend emptying the collector after every use, before

storing the appliance to avoid unpleasant odours forming.

18. CLEANING THE FILTERS

(extraordinary maintenance)

18.1 Ensure that the appliance is switched off and disconnected

from the mains 24.

18.2 Release and remove the dirt collector (25).

18.3 Lower the handle of the filter unit (31) and turn the cap until

(32) the two triangles coincide (33).

WARNING: Should foam form inside the dirt collector (usually

due to detergent being present on the surface), immediately

empty and clean fully as detailed in Chapters 17, 18 and 22.

To vacuum surfaces it is not necessary to fill the tank, simply

turn the boiler off.

WARNING: Steam.

Risk of scalding!

WARNING: Before cleaning the surface, always do a test on a

hidden part and see how it reacts to the application of steam.

WARNING: Before cleaning the surface, always do a test on a

hidden part and see how it reacts to the application of steam.

WARNING: Do not direct the steam jet directly onto surfaces.

UNICO MCV80-MCV85 - M0S11431 - 1Q09:UNICO 30/08/2016 16.17 Pagina 37

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Unico MCV80 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info