Bedienungsanleitung Polti Vaporella Forever 1402 (Seite 9 von 10) (Englisch)

648751

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

VAPORELLA FOREVER 1400- 1402 - FOREVER 1405 PRO

ENGLISH

STEAM IRONING

• Adjust the temperature of the iron to the

"COTTON - LINEN" position by turning the

dial (7) (fig. 3).

• Adjust steam pressure according to the

type of fabric to be ironed by turning the

steam flow control knob (6) to one of the

following 3 options (fig. 4):

• The Steam pressure indicator (B) flashes.

• Before starting to iron, wait for the steam

pressure indicator (B) to remain on fixed

and the “Iron heating” indicator light (11) to

go out.

• Push the button (10) on the iron to release

bursts of steam from the holes on the sole-

plate. Release the button and the steam

flow stops.

NOTE: during initial operation of the iron, a

few drops of water mixed with steam may

come out of the soleplate until the tempera-

ture stabilises. It is advisable to direct the

first jets of steam onto an old cloth until a

uniform jet of steam is obtained.

• In order to have a continuous steam jet,

move the button (10a) forwards. Steam will

keep on coming out, even releasing the

steam request button. To interrupt the ou-

tlet, move the button (10a) backwards

(fig.5).

DRY IRONING :

• To dry iron, regulate the iron temperature

using the slider (7) to the temperature re-

quired by the fabric.

• Position the steam flow control knob (6) to

“DRY”. On this setting, the boiler remains

off and steam cannot be generated. Only

the iron will remain operative.

NOTE:

• The “Iron heating” indicator light (11) turns

on and off during use. This indicates that

the electrical resistor has started to work to

keep the temperature in the iron steady.

This is a normal occurrence, and it is the-

refore possible to continue ironing.

SHORTAGE OF WATER

The lack of water in the tank (3) is signalled

by the indicator light (C) coming on.

To return to ironing, proceed as follows:

• Fill the tank (3) again, as described in the

paragraph “PREPARATION”.

• Press the “RESET” button (5) to cancel the

shortage of water alarm. The indicator light

PUTTING AWAY THE

APPLIANCE

Make sure the appliance has cooled down

completely before putting it away.

• Tug on the power cable gently (9) until it

clicks once, and then accompany it with

your hand as it is automatically wound up

by the cable winder (9a).

• Position the monotube (8) in the specific

housing (8a) (fig. 6).

• Carry the Vaporella by its convenient carry

handle (1) (fig.6).

ATTENTION: before moving Vaporella with

the handle, make sure that the power supply

cable (9) and monotube (8) have been stored

as described previously.

ENERGY SAVING

STAND-BY FUNCTION

After 10 minutes of the appliance not being

used, it automatically goes into stand-by

mode. Both the boiler and iron are switched

off.The indicator lights (A), (B) and (C) flash

simultaneously.

To re-activate the appliance, press the steam

request button (10)f or at least 1 second.

N.B.: The stand-by function will not be applied

if the steam flow control knob (6) is set to

"DRY".

Intensità di vapore leggera

for synthetic or delicate fabrics

Medium steam

for wool and fibres

Strong steam

for cotton, denim and linen

VL FOREVER 1400-1402-1405 - M0S10930 - 1U02:FEV 1000-950.qxd 25/02/2014 16.45 Pagina 16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Vaporella Forever 1402 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info