Bedienungsanleitung Polti Vaporetto Action (Seite 5 von 6) (Englisch)

648582

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

VAPORETTO ACTION

• Unscrew the screw (B) from the appliance (A),

using an appropriate screwdriver. Connect the

appliance (A) to the brush (10) and tighten the

screw (B) (Fig. 2).

Warning: Check every so often that the screw

is tight.

• Remove the water tank (5) from the appliance

pulling it upward (Fig. 3). Unscrew the cap with

the water take-up hose and remove it from the

tank (Fig. 4).

• Fill the tank with water using the jug supplied

(Fig. 5). Water by its nature contains limescale

which, as time goes by, can cause problems. To

protect your appliance, use demineralised water.

Do not add other substances or additives to the

tank.

• Screw the cap with the water take-up hose back

on the tank and hook it back on the appliance

(Fig. 6).

• Position the cloth (11/14) under the brush (Fig. 7)

and fasten it by pulling the cord (Fig. 8).

Warning: Do not use the appliance without

the cloth.

USE

• Plug the power lead (4) into a suitable socket

with an earth connection. The power indicator

light will come on (8).

• The power indicator light (8) will remain on con-

stantly indicating that the appliance is connected

to the mains.

• Wait for the pressure indicator lamp (9) to come

on. At this point the appliance is ready for use.

• To release the brush (10) from the appliance, put

your foot on the brush (10) and at the same time

tilt the handle (1) (Fig. 10). To block it again, just

return it to the original position (Fig. 10).

• Press the steam button (2) to dispense steam. To

stop it, release the steam button (2).

• Clean the floors by moving the brush forward and

backward.

• To clean rugs and carpets, rest the brush (with

the cloth attached) on the special frame (12) so

that it can slide on the surface (Fig. 9).

NOTE: the steam ready light (9) turns on and off

during use. This indicates that the electric resistan-

ce is operating to keep temperature constant and is

therefore quite normal.

Warning:

- To remove the cloth from the brush, detach the

power supply plug from the electric socket and

wait a few minutes to allow the cloth to cool.

NO WATER

When the water inside the tank (5) runs out, steam

will stop being emitted and a considerable increase

in noise will be heard. In any case, the water level

is always visible thanks to the transparent tank.

To restart operations just fill the water tank (5)

again as described in the paragraph “PREPARA-

TION”.

Warning: This operation must always be done

by disconnecting the appliance from the mains.

LIMESCALE FILTER

By nature, water contains mineral salts that favour

the formation of scale.

Vaporetto Action is supplied with a limescale filter

(7) which reduces the passage of mineral salts and

therefore the formation of limescale.

Always use demineralised water.

We recommend that the filter be changed 2 times

per year.

To replace the filter, proceed as follows:

• Unplug from the mains electricity.

• Remove the water tank (5) (Fig. 3) pulling it

upward, then remove the filter (7), still pulling

upward (Fig. 13).

• Position the new filter (7), push gently and make

sure that it is perfectly inserted (Fig. 13), then re-

position the water tank (Fig. 6).

Inside the package there is a spare filter (7), in addi-

tion to the one already mounted on the appliance.

STORING THE DEVICE

After use, proceed as follows before putting the

appliance away:

- unplug the power supply from the mains.

- completely empty the water tank (5) to avoid

water leaks

- detach the cloth from the brush, waiting a few

minutes to allow it to cool.

- wind the power supply cable around the special

cable rewinds (3) and (6) before replacing the

appliance.

Warning:

- Before using the appliance again, remember

to unwind the power cable completely. The

upper cable winder (3) rotates 180° in order to

wind up the power cable quickly.

- Do not keep the appliance connected to the

power supply with the cable wound up.

ENGLISH

VT ACTION - M0S10514 - 1T02:FEV 1000-950.qxd 22/02/2013 9.34 Pagina 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Vaporetto Action Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info