Bedienungsanleitung Polti Vaporetto Edition (Seite 11 von 15) (Englisch)

648586

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

ENGLISH

| 22 |

9. STEAM ADJUSTMENT

You can optimise the steam flow by means of the steam

adjustment knob. To increase the flow, turn the knob clockwise.

Turning anti-clockwise reduces the flow. Here are some tips for

regulating it:

• Maximum level (4/5): to remove encrustation, stains, grease

and to sanitise;

• Medium level (3): for carpets, rugs, glass and floors;

• Minimum level (1/2): to steam plants, clean delicate fabrics,

wall coverings, sofas, etc.

10. OUT OF WATER

When the product no longer dispenses steam, it means that

there is no water in the boiler.

To continue with use, proceed as follows:

• Switch off the boiler switch.

• Unplug from the mains electricity.

• Wait at least five minutes and remove the safety cap, un-

screwing it without force.

• Leave the appliance to cool for at least 10 minutes.

• Fill the boiler as indicated in Chapter 1.

• Carefully screw the safety cap back on, checking that it is

completely closed.

11. GENERAL MAINTENANCE

Before carrying out any maintenance on the device, always

unplug it from the power mains making sure that the product

has cooled down before proceeding.

To clean the outside of the appliance, only use a damp cloth

and tap water. All accessories can be cleaned using running

water, ensuring they are completely dry before the next use.

Do not use detergents of any type.

After using the brushes, we recommend letting the bristles cool

down in their natural position, in order to avoid any

deformation.

Periodically check the status of the coloured washer located in

the built-in socket. If necessary, replace with the corresponding

spare part, as described below.

Perform the same check on the connection seals of the

extension tubes and the steam hose.

If necessary, replace with the corresponding spare part, as

described below.

12. STORAGE

12.1 Turn off the appliance and disconnect from the mains

electricity.

12.2 Wait for the appliance to cool down completely before

storing it.

- Remove the damaged washer.

- Insert the new washer, attaching it on the

steam nozzle and pushing it into place.

- Lubricate the gasket with silicone grease

or Vaseline, or alternatively with small

quantities of vegetable oils.

- Remove the damaged washer.

- Insert the new washer, attaching it on the

steam nozzle and pushing it into place.

- Lubricate the gasket with silicone grease

or Vaseline, or alternatively with small

quantities of vegetable oils.

WARNING: If, while unscrewing, the cap spins freely or if steam

is escaping, immediately stop the operation, ensuring that the

boiler is switched off and the power cable is unplugged from

the mains. Wait for the appliance to cool for at least (2 hours)

and unscrew the cap. PROTECT YOUR FACE!!!

WARNING: Steam.

Risk of scalding!

WARNING: Never fill the boiler as soon as the safety cap is

opened. The boiler is still hot, even if the appliance is

unplugged. On contact with the hot, empty boiler, cold water

will evaporate producing a spray of steam which could cause

burns. Only fill the boiler when it is cold and always keep your

face away from the boiler opening when filling.

PRELIMINARE NUOVA IMPOSTAZIONE VT EDITION - EVOLUTION 1P04_vers7:UNICO 29/04/2015 12.02 Pagina 22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Vaporetto Edition Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti Vaporetto Edition

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info