Bedienungsanleitung Polti Vaporetto Lecoaspira 710 (Seite 9 von 15) (Englisch)

481646

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

the suction indicators (5) will start to flash.

• Press the boiler switch (2) which will light

up.

• Wait for the pressure indicator lamp (4) to

light up. When it does, the Vaporetto

Lecoaspira will be ready to generate steam.

• You may now deliver steam by pressing the

steam button (A5) on the handle.

• If you decide not to use the steam anymore,

you may switch off the boiler by pressing

the boiler switch (2).

Thanks to the self-filling function, there is no

longer any need to stop and wait to fill up the

boiler the again.

When the water inside the boiler reaches its

low level, the level probe will automatically

activate a pump that will fill the boiler from

the tank.

When there is no more water left in the self-

filling tank, this will be shown by the “out of

water” switch (3) and you will also be warned

by an audible signal.

In order to continue working, proceed as de-

scribed in the section on "Preparation for

use".

Vaporetto Lecoaspira will enable you to opti-

mise the steam flow by means of the control

knob (8) (Fig. 7). To obtain a higher flow rate

turn the knob in a clockwise direction. When

the knob is turned in an anti-clockwise direc-

tion, the flow rate decreases.

High flow rate of steam:

to remove caked dirt, stains, grease and to

sanitise;

Normal flow rate of steam:

for wall-to-wall and loose carpeting, win-

dows, floors;

Low flow rate of steam:

for spraying plants, cleaning delicate fabrics,

wallpaper.

You will be able to control the force of suc-

tion depending on the type of surface to be

treated. The numbers are those indicated on

the control panel.

1 for curtains

2 for sofas and cushions

3 for carpets

4 for hard flooring and for collecting liquids

Use of the suction controls

Simply by pressing the suction button (A4)

you will be able to start suction.

You will be able to select the speed required

for the type of surface to be treated by keep-

ing the suction button (A4) pressed. When

you increase the suction power, one of the

indicator lamps (5) on the control panel will

light up, and when you lower it one of the

lamps (5) will extinguish.

To turn the appliance off just press the suc-

tion button (A4).

NOTE: when you switch on the suction, the

appliance will restart from the speed it was

at the time of switching off.

Before putting away the Vaporetto

Lecoaspira, store the supply cable (13) in its

compartment (15) proceeding as follows:

• Take out the water container (20) as indi-

cated in the paragraph “preparation for

use”.

• Manually wind the cable evenly and put it

in the storage (15), making it go through

the power supply cable canal (14) (Fig.8).

• Put the water container (20) back in its

place making sure it is correctly posi-

tioned.

The accessories holder (16) allows you to fix

the tube with the brush mounted on it on the

body of the appliance.

To attach the hose to the appliance, slide the

LECOASPIRA710 - 710 KIT

Lecoaspira 710-710kit - M0S07340 1M05.qxp 22/06/2006 12.23 Pagina 57

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Vaporetto Lecoaspira 710 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti Vaporetto Lecoaspira 710

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info