Bedienungsanleitung Polti Vaporetto Lecoaspira FAV50 Multifloor (Seite 13 von 20) (Englisch)

648711

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

| 28|

handle (1) and press the suction button on the appliance to

proceed with the cleaning operations.

To adjust the suction power, hold the suction button down (the

suction indicators will start to light up) until the desired suction

level is reached.

7.2 For steam cleaning and suction use the nozzle for frames (7)

with the cap (9) attached and connect it to the handle (1) or to the

extension tubes (3) (see page 5).

7.3 (see page 5) Turn on the boiler by pressing the boiler button

and adjust the strength of the steam using the steam adjustment

dial (to turn the boiler off press the boiler button again); for this

type of surface we recommend steam level 1/2. The steam

indicator light ( ) will start flashing and continue until the correct

temperature has been reached.

Ensure that the steam lock on the handle is deactivated.

7.4 It is possible to use the suction and steam features either

together or by alternating them, activating both as described in

the previous points.

Combined use of steam and suction allows the most efficient

sanitising of the surface, dissolving dirt and removing grease,

germs and mites; it allows brightens the colour of fibres and

dries surfaces more quickly.

8. CLEANING BATHROOM FIXTURES,

GROUTING AND KITCHEN WORKTOPS

Make sure that you have prepared the appliance following the

instructions listed in Chapter 1 and connect the accessories

listed in Chapter 2.

8.1 Connect the steam concentrator accessory (4) equipped

with bristly round brush (5) to the handle (1). The steam lance

(6) can be attached to the steam concentrator accessory (4)

(see page 5). This is recommended for reaching the most

difficult areas, ideal for cleaning radiators, door and window

frames, bathrooms and shutters.

8.2 (see page 5) Turn on the boiler by pressing the boiler button

and adjust the strength of the steam using the steam adjustment

dial (to turn the boiler off press the boiler button again); for this

type of surface we recommend level 4/5 of steam. The steam

indicator light ( ) will start flashing and continue until the correct

temperature has been reached.

8.3 Ensure that the steam lock is deactivated and press and hold

the steam trigger on the handle to begin cleaning.

8.4 Connect the suction lance (11) to the concentrator accessory

(4) and activate the suction function to begin vacuuming

immediately, removing dirt thanks to the concentrated steam jet.

9. CLEANING FURNITURE AND DELICATE

SURFACES

9.1 Connect the suction lance (11) or the steam + suction nozzle

(7) to the handle and press the suction button on the appliance

(see Chapter 2).

To adjust the suction power, hold the suction button down (the

suction indicators will start to light up) until the desired suction

level is reached.

9.2 (see page 5) Turn on the boiler by pressing the boiler button

and adjust the strength of the steam using the steam adjustment

dial (to turn the boiler off press the boiler button again); for this

type of surface we recommend steam level 1/2. The steam

indicator light ( ) will start flashing and continue until the correct

temperature has been reached.

Press and hold the steam trigger on the handle and direct the

jet onto a cloth.

9.3 Use the cloth previously steamed to clean the surface,

avoiding prolonged use on the same spot.

10. OTHER GENERAL USES

10.1 BRIGHTENING UP CURTAINS AND DRAPES

Mites and dust can be removed from curtains and drapes by

steaming the fabric with just the handle. The steam is able to

remove odours and brighten up colours, allowing the fabric to

be washed less frequently.

For this surface, set the steam to level 1/2.

10.2 REMOVING STAINS FROM CARPETS AND UPHOLSTERY

Connect the steam concentrator accessory (4) without the nylon

brush; direct the steam directly onto the stain with the greatest angle

possible (never vertically with respect to the surface to be cleaned)

and place a cloth beyond the stain to collect the dirt that has been

“blown” away by the steam pressure.

For this surface, set the steam to level 1/2.

Connect the suction lance (11) to the steam concentrator accessory

(4) and activate the suction function to begin vacuuming the dirt

removed which has remained on the rug.

10.3 TAKING CARE OF PLANTS AND HUMIDIFYING ROOMS

To take care of your house plants, remove the dust from the

leaves by steaming their surface using just the handle: adjust

the steam to level 1/2 and spray at a minimum distance of 50

cm. Plants breathe better and will be cleaner and brighter.

WARNING: Do not direct the steam jet directly onto surfaces.

Before cleaning the surface, always do a test on a hidden part

and see how it reacts to the application of steam.

The different coloured brushes allow for a different colour for

each surface or environment.

For safety reasons, engage the steam lock on the handle

during vacuuming.

WARNING: Before cleaning the surface, always do a test on a

hidden part and see how it reacts to the application of steam.

WARNING: Steam.

Risk of scalding!

ENGLISH

LECOASPIRA FAV50 - M0S11128 - 1P04:UNICO 08/05/2015 16.30 Pagina 28

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Vaporetto Lecoaspira FAV50 Multifloor Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti Vaporetto Lecoaspira FAV50 Multifloor

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info