Bedienungsanleitung Polti Vaporetto PRO70 (Seite 12 von 16) (Englisch)

648567

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

9. CLEANING BATHROOM FIXTURES,

GROUTING AND KITCHEN WORKTOPS

9.1 Make sure that Chapter 1 has been followed and connect the

accessories as indicated in Chapter 2.

9.2 Connect the concentrator accessory, equipped with bristly

round brush, to the hose.

9.3 Adjust the intensity of the steam by turning the adjustment knob

(5); for this type of surface we recommend Maximum level of steam.

9.4 Ensure that the steam lock on the handle is deactivated (6).

9.5 Press and hold the steam trigger on the steam hose (7) to

start cleaning.

10. OUT OF WATER

The lack of water in the boiler is identified by the out-of-water

light coming on ( ).

To continue with use, proceed as follows:

• Switch off the boiler switch ( ) .

• Unplug from the mains electricity.

• Wait at least 10 minutes and remove the safety cap, unscre-

wing it without force.

• Leave the appliance to cool for at least 10 minutes.

• Fill the boiler as indicated in Chapter 1.

• Carefully screw the safety cap back on, checking that it is

completely closed.

11. GENERAL MAINTENANCE

Before carrying out any maintenance on the device, always

unplug it from the power mains making sure that the product

has cooled down before proceeding.

To clean the outside of the appliance, only use a damp cloth

and tap water. All accessories can be cleaned using running

water, ensuring they are completely dry before the next use.

Do not use detergents of any type.

After using the brushes, we recommend letting the bristles cool

down in their natural position, in order to avoid any deformation.

Periodically check the status of the coloured washer located

on the connection seals of the extension tubes and the steam

hose. If necessary, replace with the corresponding spare part,

as described below.

12. KALSTOP

Kalstop is thelimescale product for appliances with boiler for

ironing and steam cleaning.

Regular use of Kalstop, every time the tank is filled with water:

- Extends the life of the appliance.

- Allows emission of a “drier” steam

- Prevents limescale build up.

- Protects the walls of the boiler.

- Contributes to saving energy.

HOW TO USE KALSTOP

12.1 Open the bottle and pour half the contents into the

Vaporetto boiler filled previously with water.

12.2 Proceed with the normal cleaning operations.

ORDINARY MAINTENANCE

Every 2 months, rinse the boiler with tap water: the rinse water

will be brown, indicating that the Kalstop is working correctly.

EXTRAORDINARY MAINTENANCE WITH KALSTOP

When the boiler has heavy limescale build-up, leave just 250

ml of water in the boiler, add 3 doses of Kalstop, pressurize the

boiler and press the steam control button until the steam stops.

Turn off the appliance, wait at least 2h until it is completely cool,

rinse the boiler repeatedly to remove all limescale residue. After

cleaning the boiler, proceed normally.

Kalstop is sold in packages of 20 phials at household appliance

stores, at Polti authorized service centres and at www.polti.com.

13. STORAGE

13.1 Turn off the appliance and disconnect from the mains

electricity.

13.2 Wait for the appliance to cool down completely before

storing it.

13.3 The hoses, brush and flexible hose can be housed on the

body of the appliance, sliding the hook on the floor brush into

the parking system on the appliance (11).

13.4 The extension tubes can be replaced in the special tube

holder compartment (12).

13.5 The small accessories can be placed in the accessories

compartment. To open the compartment, press gently on the

word “PUSH” (near the bottom of the lid), and open it (10).

When the water is particularly hard, use greater concentrations

(up to one phial per litre of water).

- Remove the damaged washer.

- Insert the new washer, attaching it on the

steam nozzle and pushing it into place.

- Lubricate the gasket with silicone grease

or Vaseline, or alternatively with small

quantities of vegetable oils.

WARNING: Steam.

Risk of scalding!

WARNING: Never fill the boiler as soon as the safety cap is

opened. The boiler is still hot, even if the appliance is

unplugged. On contact with the hot, empty boiler, cold water

will evaporate producing a spray of steam which could cause

burns. Only fill the boiler when it is cold and always keep your

face away from the boiler opening when filling.

WARNING: If, while unscrewing, the cap spins freely or if steam

is escaping, immediately stop the operation, ensuring that the

boiler is switched off and the power cable is unplugged from

the mains. Wait for the appliance to cool for at least (2 hours)

and unscrew the cap. PROTECT YOUR FACE!!!

| 24 |

ENGLISH

VT PRO70 - M0S11239 - 1P07:UNICO 06/08/2015 15.47 Pagina 24

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polti Vaporetto PRO70 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polti Vaporetto PRO70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info