Bedienungsanleitung Polycom CX5500 (Seite 65 von 92) (Englisch)

628314

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Polycom CX5500 Unified Conference Station for Microsoft Lync User Guide

Polycom, Inc. 65

Integrate with Microsoft Lync Server

Your system administrator can configure your phone to work with Microsoft Lync Server and

communicate with others using Microsoft Lync. From your phone, you can monitor the status of your

Microsoft Lync contacts. For more information on integrating with Microsoft Lync Server, refer to one of

the following documents available by navigating to your phone from the Polycom Business Media Phones

web page:

● For users: Using Polycom Phones in a Microsoft Lync 2010 Environment

● For administrators: Deploying Polycom UC Software for Use with Microsoft Lync Server

Broadcast Messages Using Group Paging

The Group Paging feature enables you to make pages—one-way audio announcements—to users

subscribed to a page group. Your system administrator can define up to 25 paging groups for Group

Paging. Your system administrator can assign a label to each group or channel that easily identifies the

phones in the group or channel, such as All, HR Dept., Shipping Staff, or Executives.

Each group or channel has one of the following priorities:

● Normal By default, broadcasts sent to Groups/Channels 1 to 23 are considered Normal

broadcasts. If two users begin a broadcast on the same group/channel at the same time, the phone

with the lower serial number continues to transmit while the other phone enters the receiving state.

By default, all phones are configured to receive broadcasts sent to Group/Channel 1.

● Priority By default, broadcasts sent to Group/Channel 24 are considered Priority broadcasts. A

Priority broadcast interrupts Normal broadcasts or active calls. All phones receive Priority

broadcasts unless Do Not Disturb is enabled. Phones play Priority broadcasts at the phone’s

current audio level.

● Emergency By default, broadcasts sent to Group/Channel 25 are considered Emergency

broadcasts. An Emergency broadcast interrupts Normal broadcasts, Priority broadcasts, and active

calls and plays out at near maximum volume even if Do Not Disturb is turned on.

Group Paging Mode

Your administrator can enable your phone to operate in a broadcast mode called Group Paging mode. In

this mode, you can broadcast one-way announcements to a specified group of phones, called a paging

group. In Group Paging mode, users must subscribe to paging groups to send and receive pages.

Send and Receive Pages

To send and receive pages, you need to subscribe to certain paging groups. By default, you are

subscribed to paging groups 1, 24, and 25. This means that you can send and receive pages to paging

groups 1, 24, and 25.

Send Pages

When you send a group page, it is automatically sent to paging group 1. This is your default paging

group. Note that you cannot send a Page-mode page while you are in an active call.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polycom CX5500 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polycom CX5500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info