Bedienungsanleitung Polycom Vortex EF2280 (Seite 24 von 105) (Englisch)

628495

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

(AMLMM)) is set to manual for that automixer, then the AMASGN command will fail and an ERROR#040 message

will be generated. If the microphone is removed from an automixer where it was a ssigned as the "Chairman

Mic" and chairman mode (

AMCHAIR) is enabled for that automixer, then an ERROR#041 message will be

generated. See the

ERROR command for more information on error messages. See Section 3.5 for more

information on dependencies within the automixer commands.

Although this command is a channel integer command, the increment and decrement operators (> and <) are

not supported for this particular command.

This command is a channel integer command. See

Section 6.3 and Section 6.2 for more information on this type

of command. The minimum and maximum values for this command are 0 and 2, respectively.

This command is saved to non-volatile memory only as part of a preset. The state of this command will be

restored after power-up only if a preset is saved and that preset is set to be the power-on preset.

Example Description Status Message

F01AMASGN31

Assign input 3 to automixer

#1.

F01AMASGN31

F01AMASGN3?

Query current automixer

assignment for channel 3 .

F01AMASGN3x , where x is 0, 1, or 2 depending on

the current automixer assignment for channel 3 . If this

command is issued after the example above, then the

status message will be F01AMASGN31 .

F01AMASGN*0

Assign all mic inputs to no

automixer.

F01AMASGN*ääääääää

F01AMASGN*ààààåååå

Assign inputs 1-4 to

automixer #1 and inputs 5-8

to automixer #2.

F01AMASGN*ààààåååå

F01AMASGN*?

Query automixer assignment

for all mic/line input

channels.

F01AMASGN*abcdefgh , where each of the letters (a,

b, etc.) is either ä, à, or å depending on the current

automixer assignment for each channel. If this

command is issued after the example above, then the

status message will be F01AMASGN*ààààåååå .

8.9. AMAUTO -- Select Automatic or Manual Gating for each

Automixer Input

This command selects or queries the state of automatic or manual automixer gating thresholds for the specified

input channel. Automatic thresholds mean that the automixer adaptively determines the gating thresholds based

on current speech and noise levels using the gating ratio specified by the

AMGATER command. Manual thresholds

mean that the automixer uses the absolute threshold set via the

AMGATET command.

This command is a channel boolean command. See

Section 6.3 and Section 6.1 for more information on this type

of command.

This command is saved to non-volatile memory only as part of a preset. The state of this command will be

restored after power-up only if a preset is saved and that preset is set to be the power-on preset.

Example Description Status Message

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polycom Vortex EF2280 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polycom Vortex EF2280

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info