Bedienungsanleitung Polycom Vortex EF2280 (Seite 29 von 105) (Englisch)

628495

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

F01AMGATER3?

Query gate ratio for

automatic gating threshold

for input channel 3 .

F01AMGATER3x , where x is between 0 and 100

depending on the current setting of the gate ratio for

input channel 3 . If this command is issued after the

example above, then the status message will be

F01AMGATER315 .

F01AMGATER*12

Set gate ratio for automatic

gating threshold to 12 dB

for all input channels.

F01AMGATER*ÉÉÉÉÉÉÉÉ

F01AMGATER*ÉÉÉÉôôôô

Set gate ratio for automatic

gating threshold to 12 dB

for inputs 1-4 and 15 dB for

inputs 5-8.

F01AMGATER*ÉÉÉÉôôôô

F01AMGATER*<3

Decrease gate ratio for

automatic gating threshold

by 3 dB for all input

channels.

F01AMGATER*abcdefgh , where a-h will each be

between ä and Φ depending on the setting of the gate

ratio for each input channel. If this command is issued

after the example above, the status message will be

F01AMGATER*ììììÉÉÉÉ .

F01AMGATER*?

Query gate ratio for

automatic gating threshold

for all input channels.

F01AMGATER*abcdefgh , where a-h will each be

between ä and Φ depending on the setting of the gate

ratio for each input channel. If this command is issued

after the example above, the status message will be

F01AMGATER*ììììÉÉÉÉ .

8.16. AMGATET -- Set Automixer Gate Threshold

This command sets the automixer gate threshold (in dB) for the specified input channel. The gate threshold is

the level that the input signal must reach in order to gate the microphone on. This value us only used if the input

is set to manual gating via the

AMAUTO command.

This command is a channel integer command. See

Section 6.3 and Section 6.2 for more information on this type

of command. The minimum and maximum values for this command are 0 and 100, respectively.

This command is saved to non-volatile memory only as part of a preset. The state of this command will be

restored after power-up only if a preset is saved and that preset is set to be the power-on preset.

Example Description Status Message

F01AMGATET312

Set gate threshold for

manual gating threshold to

12 dB for input channel 3 .

F01AMGATET312

F01AMGATET3>3

Increase gate threshold for

manual gating threshold by

3 dB for input channel 3 .

F01AMGATET3x , where x is between 0 and 100

depending on the current setting of the gate threshold

for input channel 3 . If this command is issued after the

example above, then the status message will be

F01AMGATET315 .

F01AMGATET3?

Query gate threshold for

manual gating threshold for

input channel 3 .

F01AMGATET3x , where x is between 0 and 100

depending on the current setting of the gate threshold

for input channel 3 . If this command is issued after the

example above, then the status message will be

F01AMGATET315 .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polycom Vortex EF2280 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polycom Vortex EF2280

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info