Bedienungsanleitung Polycom Vortex EF2280 (Seite 65 von 105) (Englisch)

628495

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

Using this command is more efficient than deleting one command or pin at a time since this command deletes

them all at once and requires fewer writes to non-volatile memory.

This command is saved to global non-volatile memory and is not part of a preset. Its value is saved each time it

is changed. It will retain its value after power-down. Since this command writes to non-volatile memory, there

will be a delay before an acknowledgment is returned.

Example Description Status Message

F01LIK5

Delete all the commands associated with logic input pin 5. This one command is

equivalent to executing the commands 'F01LIA5, ', 'F01LID5, ', and

'F01LIH5, ' except that this command is more efficient.

F01LIK5

F01LIK*

Delete all the commands associated with all logic input pins. This one command is

equivalent to executing the commands 'F01LIA1, 'F01LID1, ', and 'F01LIH1, '

for each logic input, except that this command is much more efficient.

F01LIK*

8.70. LIM -- Mask Logic Input Pins

This command is used to mask (i.e., disable) logic input pins. The mask consists of 24 fields (one for each logic

input) that can each be set to 0 or 1. If the mask bit for a given logic input is set to 1, then the logic input pin

works normally. If the mask bit for a given logic input is set to 0, then the logic input is disabled. When a logic

input is disabled, any commands assigned to the logic pin via

LIA, LID, and LIH will not be executed.

If a logic pin is disabled and then re-enabled at some later time and the logic input has changed state from when

it was disabled, the command associated with the state change will be executed. For example, if a logic input pin

is high when it is disabled, and it is low when it is re-enabled, the command defined via

LID (or LIA if the

polarity is changed via

LIP) will be executed. However, if the pin changes state multiple times while it is

disabled, multiple commands will not be executed; only the difference in state when the logic input is re-enabled

is considered.

This command is saved to non-volatile memory only as part of a preset. The state of this command will be

restored after power-up only if a preset is saved and that preset is set to be the power-on preset.

Example Description Status Message

F01LIM100101101111011111111111

Mask (disable)

logic inputs 2, 3,

5, 8, and 13.

F01LIM100101101111011111111111

F01LIM?

Query current

logic input

mask.

F01LIMabcdefghijklmnopqrstuvwx where a-x

are each 0 or 1 depending on the current state of

the logic input mask.

8.71. LIN -- Assign Command to Logic Input Group

This command assigns a command to be executed when a group of logic input pins is in a certain configuration.

Logic groups are defined via the

LIG command.

As an example, assume that the command F01LIG2,000001111100000000000000 has been sent to the

device. This command configures logic input pins 6-10 to be part of logic group 2. Now, we send the command

F01LIN2,10,MACROX25 . This command configures logic input group 2 to execute the command MACROX25

when logic inputs 7 and 9 are active ('1') and logic inputs 6, 8, and 10 are inactive ('0'). The first number in the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polycom Vortex EF2280 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polycom Vortex EF2280

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info