Bedienungsanleitung Polycom VVX 101 (Seite 115 von 230) (Englisch)

628455

115

Zoom out

Zoom in

Vorherige Seite

1/230

Nächste Seite

Polycom VVX Business Media Phones User Guide

Polycom, Inc. 115

To disable the transmission of your video for all calls:

1 Navigate to Settings > Basic > Video > Video Call Settings.

For VVX 1500 phones, navigate to Menu > Settings > Basic > Video > Video Call Settings.

2 From the Video Call Settings screen, select Auto Start Video Tx > Disabled.

When disabled, your phone does not automatically transmit video at the start of all calls, and the No

Video icon is displayed next to your video during video calls.

Change Video Clarity

You can change the clarity of your video, including the brightness, contrast, and sharpness of your video

stream. If your camera faces a bright light source, such as a bright window, you may need to increase the

camera’s brightness, contrast, and sharpness levels so the far side can see you better. To see how you look

to the far side, view the picture-in-picture (PIP). See the section Changing the Video Call and PIP Displays

for more information on the PIP.

You can adjust the clarity of your video using the following settings:

● Target Frame Rate Sets how smoothly your video displays. You can set a rate between 5 (least

smooth) and 30 (smoothest). The default rate is 25.

● Brightness Level Sets how brightly your video displays. You can set a level between 0 (dimmest)

and 6 (brightest). The default level is 3.

● Saturation Level Sets how much color your video displays. You can set a level between 0 (lowest)

and 6 (highest). The default level is 3.

● Contrast Level Sets the difference in brightness between the light and dark areas of your video. You

can set a level between 0 (no contrast increase) and Auto (noise reduction contrast). The default level

is 0.

● Sharpness Level Sets the clarity of detail in your video. You can set a level between 0 (lowest) and

6 (highest). The default level is 3.

● Flicker Avoidance Adjusts the flickering of your video captured by the camera sensor. You can

select 50 Hz (flicker avoidance for Europe and Asia) or 60 Hz (flicker avoidance for North America).

The default is 50 Hz.

To change the clarity of your video:

1 Navigate to Settings > Basic > Video > Camera Settings.

For VVX 1500 phones, navigate to Menu > Settings > Basic > Video > Camera Settings.

2 From the Camera Settings screen, select and adjust the desired camera settings.

Changing the Video Call and PIP Displays

You can set up your phone so that it displays all video during calls in specific ways. You can choose to do

the following:

Note: Does stopping video create an audio-only call?

Stopping video doesn't create an audio-only call. Even if you stop video, video information is still

transmitted to the far side as a still picture, and the call is still a video call. To dial an audio-only call,

see Place Audio-Only Calls.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polycom VVX 101 Seite 115

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info