Bedienungsanleitung Power Dynamics 172.701 PDC-60 (Seite 5 von 40) (Deutsch, Englisch, Holländisch, Französisch, Spanisch, Polnisch)

766787

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

DAB+ menus consist of “Station scan” and “System”.

“Station scan”

a. Full scan: It scans all of the frequencies in BAND-III.

b. Manual tune: use “-”,”+” and “ENTER” button to select a frequency.

“System”

a. Time setup: There are 4 sub-items in time setup menu

Set clock: While the digit flashing, use “-”,”+” or TUNING knob to set hour and minute. Press ENTER to confirm.

Set date: While the digit flashing, use “-”,”+” or TUNING knob to set date, day and year. Press ENTER to confirm.

Auto update: Press ENTER to update the firmware automatically.

Set 12/24 hours: enter to switch between the 12-hour and 24-hour formats.

b. Factory reset: If you select “Yes”, a full reset will be performed. The station list and presets will be erased.

c. SW version: If you select the item, it shows the software version for several seconds.

24. INFO BUTTON

Switch to show different type of displaying information for the current playing channel.

FM mode

Radio text: It makes Radio text displayed on the LCD display.

Program type: It makes the program type of the current station/channel displayed on the LCD display.

Signal strength: It makes the signal strength of the current service displayed on the LCD display.

Time and Date: It makes the time and date information displayed on the LCD display.

DAB+ mode

DLS: It makes DLS text displayed on the LCD display.

Program type: It makes the program type of the current station/channel displayed on the LCD display.

Ensemble: It makes the current ensemble name displayed on the LCD display.

Time and Date: It makes the time and date information displayed on the LCD display.

Transfer rate: It makes the bit rate information displayed on the LCD display.

Signal strength: It makes the signal strength of the current service displayed on the LCD display.

25. PRESET BUTTON

During playing DAB or FM, press the PRESET button and navigate the preset number and hold and press ENTER knob until

the display shows “stored”. If you want to play a preset station/channel during playing DAB or FM press the PRESET button,

navigate through the preset numbers and press the ENTER knob to confirm choice. “P#” indicator in display means that the

preset number saved.

26. ‒ BUTTON

Press to seek for a higher frequency by 50KHZ step or navigate previous item in the sub-menu or move to previous station.

27. + BUTTON

Press to seek for a lower frequency by 50KHZ step or navigate next item in the sub-menu or move to next station.

28. TUNING / ENTER KNOB

Turn to navigate the previous or next service on the list. Press to select the displayed service on the list. Hold and press to

auto scan FM/DAB+ stations.

29. TUNER DISPLAY

This displays FM/DAB frequency station, menu and time / date information etc.

30. FM / DAB+ ANTENNA

Insert the supplied Antenna to this port.

31. TUNER OUT

Output jack for audio from tuner.

32. CD OUTPUT

Output jack for audio from CD / USB player.

33. AC IN

Insert the supplied power cord into this port.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Power Dynamics 172.701 PDC-60 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info