5
REAR PANEL
16. FM Antenna
This connector is used to fit an external FM antenna in order to use this. FM will not be supported.
17. RCA Inputs
Connect the audio output jacks of DVD/CD to these jacks.
18. Tape input and output
Press “TAPE”-button (13) on the front panel to monitor the headphone or connect with another amplifier through REC
INPUT. To connect with other audio input jacks to PLAY OUTPUT.
19. Balance output
RCA types AUX OUT jacks.
20. Unbalanced output
XLR types AUX OUT jacks.
21. Ground
Switch electrical ground ON or OFF.
22. Tuner antenna
Connect for FM antenna.
23. Power socket
To connect the power cord.
24. Voltage selector
To select the correct local voltage.
REMOTE CONTROL
1. Press this button to turn on/off the Media player.
2. When in FM mode, press this two buttons to select previous or next
channel.
3. Press these two buttons to select the previous or next track in USB or
SD or BT mode.
You also can search for FM-senders by pressing and holding the Next
button, radio starts to scan and stores the found senders.
4. Volume up or down.
5. Press the numbers to select the tracks directly. The unit takes 1-2
seconds to respond.
6. Press this button to select the different repeat mode. If press this button
for more than 3 seconds, it will go to folder searching.
7. Press to switch between USB/SD/FM/BT/Recording modes. The unit is
set in MP3 mode by default and only by pressing the “MODE” button it is
possible to switch modes.
8. EQ function.
9. Play and pause function. When in RECORDING MODE，hold the
“PLAY” button for more than 2 seconds to start recording (the word
“RECORDING” will be flashing on the display). Single press the
“PLAY/PAUSE” button stop recording, or resume recording again after
stopping. After recording, press “MODE” to start playing the recordings.
