766797
3
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
MOUNTING THE VOLUME CONTROL
The volume control is designed to be mounted in a standard
electrical wall box. Select a location that is within reach of the
speaker wires and easy to reach for using the volume control.
Warning: You must mount the volume control in a standard
electrical box, do not mount it directly on a wall.
CONNECTIONS
1. Run 4-Conductor speaker cable from the amplifier (positive and
negative for both the left and right channel) to the volume control
marked 1 and 2. Similarly, run 2-conductor speaker cable from
each of the first pair of speakers to the volume control. Label
the cables for future reference.
2. Measure the depth of the volume control to make sure your
Volume Control will fit in the box.
3. Connect the speaker cable to the volume control:
a. Strip 6mm of insulation from the end of each cable.
b. Tightly twist the wires in each cable until there are no frayed
ends.
c. Insert the 4-conductor speaker cable from the amplifier into
the input terminals.
d. Insert the two 2-conductor speaker cables from the first pair of speakers into the output terminals.
4. Connect additional speakers in parallel.
5. Make sure that all connections between your amplifier and the volume control, and between the volume
control (3) and each speaker, are in “phase”, that is (+) to (+) and (-) to (-).
6. Turn the volume knob to the “off” position (all the way down.)
7. Screw box into place.
8. Put on faceplate and screw in place using the screws.
Caution: This volume control is limited to a maximum of 50 watts maximum per channel.
SPECIFICATIONS
Power : 50 Watts / Channel
Attenuation : 1st position (slider at bottom): Full off
2
nd and 3rd position: attenuate 6 +/- 1 dB per step
4
th through 9th position: attenuate 3 +/- 1 dB per step
10
th position: Full on
Weight : 225 gram
Dimension : 70 x 112 x 83mm
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Power Dynamics 952.570 PD VOL50 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info