506173
7
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
7 - 16
INPUT PANEL
1. Balanced input MIC combo XLR + 6.3mm
Jack)
2. Balanced Jack 6.35 mm line input
3. Effect Level input
4. Volume control for MIC
5. 5-Band EQ to adjust the sound of the
outputsignal
6. Line input for audio input source e.g. mixer,
CD player, etc
7. Channel 3 Source switch MP3 / RCA or
Bluetooth
8. MP3 player display/panel
9. Volume control Channel 3.
10. DSP (Echo) signal level control
11. DSP (Echo) Mix and Time Parameters control
12. Master volume control
13. Power Indication. This clear green indicator
will light when the amplifier is turned on.
14. Clip indication. These LED will light up when
amplifier are on max power. It can occur that
these LED will lit up now and then, this is not
a problem. But if it lights up continually you
need to adjust the volume down, otherwise
permanent damage to equipment might occur
15. Mains Power Connector / Fuse. This main
fuse secures the speaker against defects.
Replace this only with a fuse of same type
and value.
16. On/Off Switch: For switching the speaker on
and off. Always adjust the volume down to its
minimum before switching this speaker on.
17. Output for external passive speaker. NOTE:
Minimum impedance is 8 Ohm!
MP3 PLAYER :
A. DISPLAY: Shows MP3 information
B. USB/SD/Bluetooth SWITCH: Use switch for
playing from USB stick,SD card, Bluetooth
C. PLAY/PAUSE: Track play or pause mode
D. STOP: Track stop playing
E. REPEAT: Select All, Folder, One or Random
F. PREV: Play previous track
G. NEXT: Play next track
H. USB CONNECTION
For connection of a USB stick with MP3 files
I. SD CARD CONNECTION
For connection of a SD CARD with MP3 files
HOW TO CONNECT WITH YOUR BLUETOOTH DEVICE:
First turn on speaker, then press on “MODE” (F) till you see “AUX”. Then use your mobile or computer to search a
Bluetooth device. When you find the “POWER DYNAMICS PLAYER” then connect. The password is: 0000
EXTERNAL SPEAKER
These speakerseries come with a 4-p speaker connector (17) for connection to an extra passive speaker. For optimized
performances we recommend you to use only the PDA passive speakers, which are especially designed for these
series. Minimum impedance is 8 Ohms.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Power Dynamics ACTIVE SPEAKER BLUETOOTH MP3 PDA 15ABT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info