Bedienungsanleitung Powerfix 8985658 - IAN 300278 (Seite 9 von 29) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

773287

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

9 GB/IE

Introduction Safety instructions / Assembly / Use / Cleaning and care

Safety instructions

ATTENTION! READ ASSEMBLY INSTRUCTIONS

AND OPERATING INSTRUCTIONS BEFORE USE!

KEEP THE ASSEMBLY INSTRUCTIONS AND

OPERATING INSTRUCTIONS IN A SAFE PLACE!

KEEP OUT OF

THE REACH OF CHILDREN.

THIS PRODUCT IS NOT A TOY!

INJURIES MAY OTHERWISE OCCUR!

max.

150 kg

Ensure that the product is not

subjected to a load greater than

150 kg. Otherwise injury and /

or damage to property may occur.

The four castors are to be assembled before

use in accordance with the instructions (see the

chapter „Assembly“). The self-securing nuts

(lock nuts) prevent the screw connections from

loosening, even during a „bumpy“ transport.

However, we advise that you inspect them at

regular intervals to ensure that they are tight

and rectify this if required.

After assembling the castors, the tightness of each

individual screw connection is to be examined.

If it is necessary to loosen one or more screw

connections then new lock nuts must be used.

The trolley is exclusively intended for transporting

goods. Transporting people is not permitted.

Assembly

Assemble the castors as depicted in Figure B.

After assembling the castors, the tightness of

each individual screw connection is to be ex-

amined. If it is necessary to loosen one or more

screw connections then new lock nuts must be

used.

Use

Increasing/decreasing the

loading area

You can extend or push together the loading

area 2. A movable clip 3 prevents it from

accidentally extending from its slid-in position.

To extend the area, ﬁrstly loosen the clip 3

and extend the loading area.

Then, ﬁx the clip 3 to the centre cross brace.

To push the area together, loosen the clip 3

and push the loading area together.

Then, ﬁx the clip 3 into its original position.

Folding the handle element

Two square tubes and the extendable bow-shaped

handle 1 are part of the handle element (see Fig. A).

To unlock or to bring the bow-shaped handle 1

into the horizontal position, ﬁrst press the pro-

ﬁle frame 8 downwards, then press the bow-

shaped handle 1 into the square tubes. Then,

fold the handle element forward. Two retaining

springs bring the frame back into the rest position.

In the upright position and in its extended state

the handle element or bow-shaped handle 1

will audibly click.

Activating/loosening the

locking device

To lock the swivel castors 6 press the locking

device 7 downwards with your foot.

Loosen the locking device 7 by pressing this

upwards with your foot.

Cleaning and care

As the proﬁles of the loading area 2, which

have been slid into each other, have a light oil

ﬁlm upon delivery, refrain from cleaning them

using solvents or by putting them in solvents.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerfix 8985658 - IAN 300278 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info