Bedienungsanleitung Powerplus pow 30001 (Seite 5 von 8) (Englisch)

389287

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

POW30001 EN

5.4 Power tool use and care

§ Do not expect the power tool to do more than it can. Use the correct power tool for what

you want to do. A power tool will achieve better results and be safer if used in the context

for which it was designed.

§ Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken

switch is dangerous and must be repaired.

§ Disconnect the plug from the power source before making adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

§ Store power tools, when not in use, out of the reach of children and do not allow people

who are not familiar with the power tool or these instructions to operate it. Power tools are

potentially dangerous in the hands of untrained users.

§ Maintenance. Check for misalignment or jammed moving parts, breakages or any other

feature that might affect the operation of the power tool. If it is damaged, the power tool

must be repaired. Many accidents are caused by using poorly maintained power tools.

§ Use the power tool, accessories and cutting tools, etc., in accordance with these

instructions and in the manner intended for the particular type of power tool, taking into

account the working conditions and the work which needs to be done. Using a power tool

in ways for which it was not intended can lead to potentially hazardous situations.

5.5 Service

Your power tool should be serviced by a qualified specialist using only standard spare parts.

This will ensure that it meets the required safety standards.

6 SPECIFIC SAFETY INSTRUCTIONS

§ Always use the auxiliary handle for maximum control.

§ Secure the material being drilled. Never hold it in your hand or across legs. Unstable

support can cause loose of control and injury.

§ Do not touch the bit after operation. It could be very hot.

§ Keep your hand away from under the work piece.

7 ASSEMBLY

Disconnect the power plug before carrying out any adjustments or

maintenance.

7.1 Inserting bit or drill

§ Open the chuck (1).

§ Insert the drill or bit in the chuck.

§ Tighten the chuck firmly.

Check if the bit or drill is in the centre of the chuck.

7.2 Auxiliary handle

The auxiliary handle (8) will provide additional control, support and guidance for the drill.

§ Slide the holder of the side grip over the drill chuck on the machine.

§ Turn the side grip in the required position and tighten it firmly.

7.3 Depth gauge

The depth stop is used to limited the maximum drilling depth.

§ Loosen the side grip (8).

§ Insert the depth stop (2) in the hole in the holder of the side grip.

§ Adjust the depth stop to the required drilling depth.

§ Tighten the side grip firmly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus pow 30001 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus pow 30001

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info